User Manual (XP/Vista/Windows7)

82
Chapter 2.
Using the computer
Using 3D
(for 3D models only)
2
If you put on the 3D active glasses and press the 3D button, the
data exchange begins between the glasses and the software
(hereafter, referred to as pairing).
Only when a 3D video or 3D game is executed can the •
pairing process be done.
More than one person can watch pictures in 3D at the •
same time using more than one pair of glasses.
A chargeable pair of 3D active glasses may not work if •
the battery is discharged. In this case, charge the glasses
before use.
For chargeable 3D active glasses, if the glasses do not start •
working immediately when you put them on in 3D mode,
lightly touch the ‘sensor pad’ of the glasses or press and
hold the 3D button for 3~5 seconds to reattempt pairing.
For battery-operated 3D active glasses, you have to press •
and hold the 3D button for 4~5 seconds or longer when
you perform pairing for the fi rst time.
3
Now, you can enjoy videos or games in 3D.
The LED indicator for the battery-operated 3D active
glasses
On
If you press the power button, the LED
turns yellow for 3 seconds and then
turns off .
O ff
If you press the power button, the LED
turns red for 3 seconds and then turns
o ff .
When the pairing
process is in progress
The LED blinks yellow.
When the pairing
progress has been
completed
The LED alternates between blinking
yellow and red for 3 seconds each.
When the battery
needs to be replaced
The LED blinks red continuously.