User manual

7-12
Manual
2. In the [Display Properties] window, select the Settings tab > Advanced >
GeForce Go xxxx tab.
3. Select the Full Screen Video menu> Full Screen Video Control item, set the Full
Screen Device to ‘Auxiliary Display’ and then click the Apply button. Then
you can view video on both the LCD and CRT display devices.
Q7 After connecting to a TV, some programs such as Debug, Mem,
etc. do not run in full screen MS-DOS mode.
A If a TV is used as the display device, some programs such as Debug, Mem, etc.
may not run properly in full screen MS-DOS mode. Run the programs in the MS-
DOS window.
Q8 The Taskbar on the bottom of the screen does not appear when
a projector is used as the display device.
A A This may happen, even though SXGA+ LCD supports the 1400°ø1050 mode,
the projector does not support that mode. In this case change the resolution to
1024x768 (recommended) on your computer.
Q9 Switching the MS-DOS command prompt to full screen mode or
Windows mode by pressing the <Alt>+<Enter> keys does not
operate properly.
A Pressing the <Alt>+<Enter> keys using an USB keyboard, may cause the key
input to be recognized as multiple key inputs depending on the keyboard input
recognition time. In this case, the MS-DOS command prompt is repeatedly
switched to full screen and then to Windows several times. Please press the
<Alt>+<Enter> keys more quickly, or press the <Alt>+<Enter> keys using the sys-
tem keyboard.
Q10 When a TV is connected, the Turn off monitor power option is
not performed.
A When connecting a TV after booting up your computer, the Turn off monitor
power option may not be performed. For it to operate properly, it is recommend-
ed to connect a TV and then booting up the computer.
Q11 Pressing the shortcut key on the keyboard does not show the
Samsung Display Manager icon.
A The Samsung Display Manager icon only appears when both the Magic
Keyboard and the Samsung Display Manager program are installed.
x11-hk_ch7 2006.1.24 3:32 PM 페이지12 1000 Dolev-2540-Color-S T