User Guide 1 Getting Started 2 Using the Computer 3 Settings and Upgrade 4 Backup / Restore 5 Appendix Contents Start
Contents Chapter 1 Getting Started Chapter 1. Getting Started Chapter 3. Settings and Upgrade 3 4 7 22 25 32 83 85 86 88 91 92 94 99 Tips Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off Chapter 2.
Chapter 1.
Tips Q A Tip The computer is not turning on or does not respond and displays a blank screen. Restore the computer using Samsung Recovery Solution. 1. T urn the computer on and press the F4 key when the booting screen (SAMSUNG logo) appears. 2. T he computer will boot up in restore mode after a short while and Samsung Recovery Solution appears. 3. When the start menu screen appears, click Restore. Chapter Chapter1.
Before You Start Before reading the User Guide, first check the following information. •• Optional items, some devices and software referred to in the User Guide may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Guide may not be the same as your own environment. •• The pictures used for the cover and the main body in the User Manual are those of the representative model of each series and may differ from the actual appearance of the product.
Before You Start Chapter 1 Getting Started Safety Precaution Notations Icon 5 Copyright Notation Description Warning Failure to follow instructions marked with this symbol, may cause personal injury and or fatality. Caution Failure to follow instructions marked with this symbol, may cause slight injury to yourself or damage your property. © 2012 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual.
Before You Start About the Product Capacity Representation Standard About the capacity representation of the storage The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation. (E.g.
Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung Computers, some pictures may differ from actual products. Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Installation Related Do not install the product in places exposed to humidity such as a bathrooms. There is a danger of electric shock.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model. Do not touch the main plug or power cord with wet hands. There is a danger of electric shock. Do not exceed the standard capacity (voltage/current) of a multiplug or power outlet extension when using it for the product.
Safety Precautions Warning Chapter 1 Getting Started 9 AC Adapter Usage Precautions Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Connect the power cord to an outlet or multiple power plug (extended cable) with a ground terminal. Failure to do so may result in electric shock. When the power supply is ungrounded, the current may leak resulting in electric shock.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Battery Usage Related Please charge the battery fully before using the computer for the first time. Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. There is a danger of electric shock or choking. Use an authorized battery and AC adapter only. Please use an authorized battery and adapter approved by Samsung Electronics.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Chapter 1 Getting Started 11 Cutting the power to the internal battery (for corresponding models only.) Never heat the product(or battery) or put the product(or battery) into a fire. Do not put or use the product(or battery) in a hot location such as a sauna, inside a vehicle exposed to the heat, and so on. There is a danger of an explosion or fire.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. •• Thereafter, if you connect the AC adapter, the battery power will be supplied again. •• Do not cut the battery power under normal conditions. •• This may result in data loss or a product malfunction. The location of the Emergency Hole may differ depending on the model.
Safety Precautions Warning Chapter 1 Getting Started 13 Upgrade Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Avoid direct sunlight when the computer is in an air-tight location such as inside a vehicle. There is a danger of a fire hazard. The computer may overheat and also present opportunity to thieves. Do not use your notebook PC for long periods of time while any part of your body is making direct contact with it.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Security and Movement Related Follow the instructions for the relevant location (e.g. airplane, hospital, etc.) when using a wireless communication device (wireless LAN, Bluetooth, etc.). Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 15 Battery Usage Related Dispose of worn-out batteries properly. •• There is a danger of fire or explosion. Installation Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Damage to a component within the computer may cause electric shock or fire.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Usage Related Do not place a candle, light cigar, etc. over or on the product. There is a danger of fire. Use a wall outlet or multi-plug with a grounding part. Chapter 1 Getting Started 16 Connect only permitted devices to the connectors or ports of the computer. Failure to do so, may cause electric shock and fire.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 17 Do not place your face close to the Optical Disk Drive tray when it is operating. There is a danger of injury due to an abrupt ejection. Check CDs for cracks and damage prior to use. If the computer emits smoke, or there is a burning smell, disconnect the power plug from the wall outlet and contact a service center immediately.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Upgrade Related Take care when touching the product or parts. The device may be damaged or you may be injured. Take care not to throw or drop a computer part or device. Chapter 1 Getting Started Security and Movement Related When moving the product, turn the power off and separate all connected cables first. The product might be damaged or users may trip over the cables.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Cautions on Preventing Data Loss (Hard Disk Management) Take care not to damage the data on a hard disk drive. •• A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk.
Safety Precautions Using the power supply in an airplane Since the power outlet type differs depending on the type of airplane, connect the power appropriately. Since the representative figures of the power plug and the auto adapter are used, they may differ from the actual parts. Chapter 1 Getting Started 20 When using the AC power plug Connect the power plug pins perpendicular into the center of the power outlet.
Safety Precautions Chapter 1 Getting Started When using the auto adapter When the cigar socket is provided, you have to use the auto adapter (optional). Insert the cigar plug of the auto adapter into the cigar socket and connect the DC plug of the auto adapter to the power input port of the computer. Auto Adapter DC Plug Cigar Plug In-flight Cigar Socket When using the Airplane Charging Converter Depending on the airplane, you have to use the auto adapter and charging converter.
Proper Posture During Computer Use Chapter 1 Getting Started 22 Maintaining a proper posture during computer use is very important to prevent physical harm. •• Do not use the computer while you are lying down, but only while you are sitting down. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. •• Do not use the computer on your lap.
Proper Posture During Computer Use Chapter 1 Getting Started Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least 50cm. Keep your arm at a right angle as shown by the figure. •• Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. •• Avoid setting the monitor and LCD excessively bright. •• Keep the monitor and LCD screen clean. •• If you wear glasses, clean them before using the computer.
Proper Posture During Computer Use Chapter 1 Getting Started 24 Volume Control (Headphones and Speakers) Use Time (Break Time) Check your volume first to listen to music. •• Take a break for 10 minutes or more after a 50-minute period when working for more than one hour. Illumination •• Do not use the computer in dark locations. The illumination level for computer use must be as bright so for reading a book. Check your volume! •• Check if the volume is too loud before using headphones.
Overview Chapter 1 Getting Started Front View •• The pictures used for the cover and the main body in the User Manual are those of the representative model of each series. Therefore the colors and appearance of the pictures may differ from the actual appearance of the product depending on the model. •• The actual color and appearance of the computer may differ from the pictures used in this guide. •• This may not be supported for some devices.
Overview Chapter 1 Getting Started Front View •• The pictures used for the cover and the main body in the User Manual are those of the representative model of each series. Therefore the colors and appearance of the pictures may differ from the actual appearance of the product depending on the model. •• The actual color and appearance of the computer may differ from the pictures used in this guide. •• This may not be supported for some devices.
Overview Chapter 1 Getting Started Status Indicators 1 Caps Lock 27 This turns on when the Caps Lock key is pressed allowing capital letters to be typed without holding the Shift button down. On: Upper-case alphabetic input Off: Lower-case alphabetic input 2 HDD/ODD This turns when either the HDD or ODD is being accessed. This shows the power source and the battery charge status. 1 2 3 4 reen: When the battery is fully charged G or the battery is not installed.
Overview Chapter 1 Getting Started Right View ► For 14 inch models 28 1 Headphone Jack A jack used to connect the headphones. 2 Microphone Jack A jack used to connect the microphone. Contact-type Smart 3 Card Reader (Optional) A card slot supports smart cards. Plays CD or DVD titles. 4 1 2 3 4 5 6 7 eSATA/ 5 USB Common Port (Optional) ► For 15.
Overview Chapter 1 Getting Started Left View 2 Wired LAN Port Connect the Ethernet cable to this port. 3 Fan Vents The internal heat of the computer is emitted through these holes. If the vents are blocked the computer may overheat. Avoid blocking the vents as this may be dangerous. 4 Monitor Port A port used to connect a monitor, TV or projector supporting a 15pin D-SUB interface. Digital Video/ 5 Audio Port (HDMI) (Optional) You can connect an HDMI cable to this port.
Overview Chapter 1 Getting Started Left View ► For 15.6 inch models USB Port or 3 Chargeable USB Port (Optional) 1 2 3 4 5 6 7 8 9 30 USB ports to which you can connect USB devices as well as a Chargeable USB port are provided. Using a Chargeable USB port, you can access or charge a USB device. The port can be distinguished by the figure printed on the port of the product. USB 2.0 port Chargeable USB 2.0 port USB 3.0 port Chargeable USB 3.
Overview Chapter 1 Getting Started 31 Bottom View ► Type A Model 1 2 3 4 5 6 ► Type B Model 1 2 3 1 Battery This is a Lithium-Ion rechargeable battery that supplies power to the computer. 2 Battery Latches The latch used to remove or install the battery. Docking Port (Optional) This is the port to connect the Business Docking Station to (sold separately). CD drive (ODD) 4 separation latch (Optional) This latch is to separate the CD or DVD drive from the computer.
Turning the Computer On and Off Chapter 1 Getting Started 32 Turning the computer on 1 2 3 Install the battery and connect the AC adapter. Lift the LCD panel up. Press the Power button to turn the computer on. About Windows Activation When you turn the computer on for the first time, the Windows activation screen appears. Follow the activation procedures according to the instructions on the screen to use the computer.
Turning the Computer On and Off Turning the computer off •• Since the procedures to turn the computer off may differ depending on the installed operating system, please turn the computer off according to the procedures for the purchased operating system. •• Save all your data before clicking on Shut down. •• If Easy Settings is installed, the system shutdown location may differ. Click z Start the computer.
Chapter 2.
Keyboard Shortcut key functions and procedures are discussed in the following sections. •• The keyboard image may differ from the actual keyboard. •• The keyboard may differ depending on your country. The following mainly describes the shortcut keys. Shortcut Keys You can use the following functions by pressing the keys below with the Fn key. + Chapter 2.
Keyboard Fn Chapter 2. Using the computer Name REST (Sleep Mode) Screen Brightness Control CRT/LCD Touchpad/ Pointing Stick + Omnipass 36 Function Switches to Sleep mode. To wake the computer up, press the Power button. Controls the screen brightness. Switches the screen output to the LCD or external monitor when an external monitor (or TV) is connected to the computer. Turns the touchpad function or pointing stick function on or off. The Omnipass security program is executed.
Keyboard Chapter 2. Using the computer Numeric Key (For 14, 15.6 inch models) Other Function Keys For 14-inch models, press the NumLock key to use some of the keys as numeric keys. Performs the right-click mouse function (touchpad). For 15.6-inch models, once the NumLock is on, the numeric keypad in the right side of the keyboard is enabled. NumLock ScrollLock If the hot keys do not work properly, you have to install the Easy Settings.
Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse. To use the touchpad, the touchpad driver is required. A built-in Windows driver and a driver provided by the manufacturer are provided. For a better performance, using the driver provided by the touchpad manufacturer is recommended.
Touchpad Chapter 2. Using the computer 39 Click Function Right Button Function Place a finger on the touchpad and click on an item once. This corresponds to clicking the right mouse button. Alternatively, press the left button once quickly and release it. Press the right touchpad button once. The corresponding pop-up menu appears. Tap or Click Click Double-Click Function Drag Function Put your finger on the touchpad and quickly tap twice with your finger on an item you want.
Touchpad The Gesture Function of the Touchpad (Optional) Chapter 2. Using the computer 40 Configuring the Gesture Function Some gesture functions may not be configured. •• The Touchpad Gesture function may not be provided and the version of the function may differ depending on the model. Some usage procedures may differ depending on the version. •• For detailed usage procedures, refer to the description in the Touchpad Settings window.
Touchpad Chapter 2. Using the computer 41 The Scroll Function Page Move Function This function is the same as the scroll area of the Touchpad. You can move to the previous or next page when you are looking at a photo or surfing the Internet. If you place two fingers over the Touchpad and move them up, down, left or right, the screen is scrolled up, down, left or right accordingly.
Touchpad Setting the Touchpad Sensitivity If the touchpad reacts too sensitively or the pointer moves unintentionally, please adjust the touchpad pointer speed and sensitivity. Adjusting the Touchpad Pointer Speed Click Start > Control Panel > Hardware and Sound > Mouse > Pointer Options and then adjust the pointer speed. Adjusting the Touchpad Palm Detection Function The palm detection function is to avoid malfunctions when the palm touches the touchpad by mistake.
Touchpad Chapter 2. Using the computer 43 Touchpad On/Off Function Locking with shortcut keys Auto-locking when connecting USB mouse If you don’t want to use the touchpad, you can turn the touchpad off. ► When using the Elan driver Press the + key combination once. Then the screen appears where you can select a device mode. Since pressing the key while holding down the key chnges the selection, select a device mode.
Pointing Stick (Optional) The pointing stick provides the same function as a mouse. The buttons of the pointing stick plays the role of the left and right buttons and wheel button of a mouse. Chapter 2. Using the computer 44 Pointing Stick Use to move the cursor. To use the pointing stick, the pointing stick driver is required. The driver provided by the pointing stick manufacturer is already installed in this product by default when you purchase this product.
Pointing Stick (Optional) Chapter 2. Using the computer Basic Pointing Stick Functions Moving the cursor on the screen Double-Click Function Place your finger on the pointing stick slightly and move your finger. The mouse cursor will move accordingly. Move your finger in the direction you wish to move the cursor. Put your finger on the pointing stick and quickly tap twice with your finger on an item you want. Alternatively, press the pointing stick left button twice quickly.
Pointing Stick (Optional) Chapter 2. Using the computer Drag Function Scroll Function Dragging refers to moving an item to another place after selecting it. This function is the same as the scroll area of the Touchpad. Press and hold down the pointing stick left button over an item you want to drag and move the item to the new location. Press and hold down the scroll button and move the pointing stick up, down, left or right. Then, the screen is scrolled up, down, left or right accordingly.
Pointing Stick (Optional) Adjusting the Pointing Stick Sensitivity If the pointing stick reacts too sensitively or the pointer moves unintentionally, please adjust the pointing stick pointer speed and sensitivity. Adjusting the Pointer Speed Click Start > Control Panel > Hardware and Sound > Mouse > Pointer Options and then adjust the pointer speed. Chapter 2.
Pointing Stick (Optional) Auto-locking when connecting USB mouse ► When using the Synaptics driver Click Start > Control Panel > Hardware and Sound > Mouse > Device Settings, and check the Disable internal pointing device when external USB pointing device is attached in option. This will turn the touchpad and the pointing stick off when a USB mouse is connected. In case of some touch-screen model, checking option locks the touchpad and the pointing stick even though you did not connect a USB mouse.
CD Drive (ODD, Optional) Chapter 2. Using the computer An optical disk drive is optional and may differ depending on your computer model. For detailed specifications, refer to the catalogue. 2 When the CD tray opens, insert a CD or DVD and push the tray in until it clicks. 3 Push the CD tray inward until it clicks. 49 •• Do not insert a cracked or scratched CD. Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed.
CD Drive (ODD, Optional) Chapter 2. Using the computer 50 Installing/Removing the CD drive 1 Shutdown the system, close the LCD panel and place the computer upside down on a flat surface. 2 Pull the CD drive separation latch remove the CD drive. 3 To install the CD drive again, slide the CD drive separation latch into the system. The CD drive separation latch move inward and fix the CD drive automatically. outward, then Check if the CD drive separation latch has been moved inward.
ExpressCard Slot (Optional) The ExpressCard slot can be regarded as the next generation PCMCIA card specification and supports LAN, TV Tuner and Sound cards. Chapter 2. Using the computer 2 This computer’s slot supports the Express Card/34 specification. If a window asking whether you want to scan and change appears, click on Continue Without Scan. •• This slot is a ExpressCard slot. You cannot connect a PCMCIA card here. To insert a card 1 Insert a card into the slot on the side of the computer.
Multi Card Slot (Optional) Using the multi card slot, you can read and write data to cards. You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera, digital camcorder, MP3, etc.. Chapter 2. Using the computer Using the card 1 Insert the card into the multi card slot in the indicated direction.
Multi Card Slot (Optional) 3 You can save, move and delete data by double-clicking the corresponding drive. You can only use the card after formatting it. Chapter 2. Using the computer 53 Using a Mini SD Since the above cards are too small, you cannot insert the cards into the slot directly. Insert the card into the dedicated adapter (available from most electronic retailers) and then insert the adapter into the multi card slot.
Multi Card Slot (Optional) To remove a memory card Take hold of the end of the card and remove the card. To format a memory card When using the memory card for the first time, you must format the card before using it. Formatting a card deletes all data saved on the card. If the card includes data, backup the data before formatting it. 1 2 3 Click Start > Computer. Right-click over a card drive with the touchpad and select Format. Click Start to the formatting. Chapter 2.
Connecting an External Display Device If you connect an external display device such as a monitor, TV, projector, etc., you can view the picture on the wider screen of the external device when you give a presentation or watch a video or movie. Chapter 2. Using the computer About the connection cable Users should additionally purchase the necessary connection cables. The computer provides an analog monitor port (RGB) and a digital video/audio port (HDMI).
Connecting an External Display Device Connecting to the monitor port You can experience a wider screen by connecting the computer to a monitor, TV or projector with a monitor port. You can give better presentations by connecting the computer to a projector. 1 Connect the RGB port of the computer and the port of the monitor or TV with the monitor cable (15 pin). External Monitor 3 Chapter 2. Using the computer Press the + 56 key combination once.
Connecting an External Display Device Connecting through the HDMI port (Optional) By connecting the computer to a TV with a HDMI port, you can enjoy both a high visual quality and a high sound quality. After connecting a TV through HDMI, you have to configure the screen and sound. 1 2 Chapter 2. Using the computer 57 Press the + key combination once. Then the setting screen appears where you can select the monitor mode.
Connecting an External Display Device Chapter 2. Using the computer Setting up HDMI TV video (Optional) ► For Intel graphics cards If the Desktop screen displayed on the TV does not fit to the TV screen, configure it as follows depending on the graphics card. 1 •• You can view the graphics card type by selecting Device Manager > Display adapters and then clicking the + symbol. •• The screen images and terms may differ from actual product depending on the computer model and driver version.
Connecting an External Display Device ► For NVIDIA graphics cards This function is not provided in the Optimus specifications. 1 2 3 Chapter 2. Using the computer Resize the Desktop using the resize bars so that the four arrows at the corners of the Desktop are placed in the corners of the TV and then click OK. Right-click over the Desktop and select NVIDIA Control Panel.
Connecting an External Display Device Setting up HDMI TV audio (Optional) You can configure the sound of the computer to be played through the HDMI TV. 2 Chapter 2. Using the computer 60 Change the setting to Digital Audio (HDMI), HDMI Device or Digital Output Device, click Set Default and click OK. You have to configure the sound device in the Control Panel whenever you connect the HDMI TV in order to hear sound from the computer on the TV.
Connecting an External Display Device Using NVIDIA graphics more efficiently (optional) NVIDIA Optimus is a function that enables automatic selection and usage of the internal or external graphics chipsets depending on the currently running software.
Connecting an External Digital Device You can save a file stored on a device onto the computer by connecting a digital device such as a camera, camcorder or mobile phone to the computer and using the file management functions. 2 Chapter 2. Using the computer The Auto run window appears. Click Open folder and view files. If the window does not appear, click Start > Computer.
Adjusting the Volume Chapter 2. Using the computer You can adjust the volume using the keyboard and the volume control program. Adjusting the Volume using the Keyboard + Alternatively, press the + Or + key combination to turn the volume on or off. Adjusting the Volume using the Volume Adjustment Program Click the Volume icon on the taskbar and slide the volume control bar to adjust the volume.
Adjusting the Volume Chapter 2. Using the computer Using SoundAlive (Optional) The SoundAlive function enables you to experience more stereophonic sound using stereo speakers. 1 2 3 ► Basic Mode Music Select this mode to listen to music. •• SoundAlive is only supported in Windows 7. Movie Select this mode to watch a movie. •• The software programs provider may vary, depending on your computer model. Speech Emphasizes voice over other sounds.
Adjusting the Volume Connecting and using a headphone or microphone Using the headphone jack 1 2 Right-click over the Volume Control icon in the notification area at the bottom right of the Desktop and select Playback Devices. (Alternatively, click the Control Panel > Hardware and Sound > Sound > Playback tab.) Select the Speakers, click Set Default and click OK.
Wired Network A wired network is a network environment used for a company network or broadband internet connection at home. •• Since these descriptions are written on the basis of the latest operating system, Windows 7, some of the content and the figures of the descriptions may differ depending on the operating system. Since the procedures for other Windows operating systems are similar, use the computer referring to these descriptions. Chapter 2.
Wired Network 3 Select Local Area Connection and click the right button of the touch pad and select Properties. Chapter 2. Using the computer 4 67 Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties. The LAN Device name may differ depending on your computer’s Network Device. •• The Network Component name may differ depending on the Operating System Installed. •• To add a network component, click Install in the screen shown in the figure above.
Wired Network 5 Configure the IP settings. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually. Chapter 2. Using the computer Using the WOL (Wake On LAN) function is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN). 1 2 When not using DHCP, ask your network administrator for the IP address.
Wired Network 3 Click Configure > Power Management tab. Select Allow this device to bring the computer out of standby, then click OK. Restart the system. - I f the system wakes up from Sleep mode even though there is no received signal, use the system after disabling the function. - T he LAN LED may not be turned off if System is shoutdown without disabling the WOL (Wake on LAN) option. - C onnecting a wired LAN while using a wireless LAN may not activate the function.
Wireless Network (Optional) A wireless network (Wireless LAN) environment is a network environment that enables communicating between multiple computers at home or a small-size office through wireless LAN devices. Chapter 2. Using the computer 70 •• The screen figures and terms may differ depending on the model. •• Depending on the program version, some functions may not be provided or different functions may be provided.
Wireless Network (Optional) Connecting to a Wireless LAN through Windows Chapter 2. Using the computer 2 If there is an AP, you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows. 1 Click Connect. If a network key is set for the AP, enter the network key and then click Connect. For the network key, please ask your network administrator. If you click the Network Connections icon in the system tray, a list of available APs appears.
Wireless Network (Optional) Chapter 2. Using the computer 72 When you are not connected to the Internet Normal Wireless LAN Status If the wireless LAN icon is displayed in the system tray of the Taskbar, it indicates that the computer is connected to the Internet properly (see below). This is indicated by the wireless LAN icon in the system tray of the Taskbar. In this case, you have to check the IP address settings. Please contact your network administrator and reconfigure the IP address.
Using the TPM Security Device (Optional) A TPM (Trusted Platform Module) security device is a security solution that protects your personal information by saving the user authentication data on the TPM chip installed on the computer. To use the TPM security device, you have to initialize the TPM chip in the BIOS Setup, initialize the TPM program, and then register the user. •• This function is only supported for models with TPM (security chip).
Using the TPM Security Device (Optional) Initializing the TPM chip 2 When you use the TPM function for the first time or you want to register the user again, you have to initialize the TPM chip. 1 Restart the computer. 74 If the BIOS screen appears, select the Security > TPM Configuration item and press Enter. SysInfo •• Initializing the TPM chip erases all authentication information saved on the TPM chip. Any decision to initialize must be taken carefully.
Using the TPM Security Device (Optional) 4 Press the F10 key to save the changes. 5 When the computer restarts automatically and the Samsung logo screen appears, press the F2 key repeatedly. 6 Select the Security > TPM Configuration > Change TPM Status item and set the item to Enable and Activate.
Using the TPM Security Device (Optional) Installing the TPM program You can install the TPM program as follows. Install the program according to the procedures below. Launch the Samsung Recovery Solution. Click the System Software icon. Click the System Software Installation icon. Select TPM Host SW and click Install Now. If the system software media is supplied with the product, you can install the program by using the system software media (only when supplied.
Using the TPM Security Device (Optional) If the status not initialized message appears, click Yes. If you backup the emergency recovery file to an external storage device according to the instructions of the Initialization Wizard, you can use the TPM security device more safely. 3 Select a Security Platform Feature and set a basic user password. 4 The Security Platform is now ready for construction. Click Next to start constructing the Security Platform.
Using the TPM Security Device (Optional) Using the TPM program 2 Chapter 2. Using the computer 78 If the Confirm Attribute Changes window appears, select the range to apply the encryption to and click OK. (This dialog box only appears when the folder is encrypted.) For more information about using the TPM program, refer to the online help for the program. Encrypting a file (folder) This function enables encrypting files and folders.
Using the TPM Security Device (Optional) 4 You will be able to confirm that the color of the folder (file) name in the encrypted folder has been changed to green. Chapter 2. Using the computer 79 Decrypting an encrypted folder (file) 1 2 3 Right-click over an encrypted folder (file) and select Decrypt from the pop-up window. If the user authentication window appears, enter the basic user password you entered when registering the user and click OK. The folder (file) is decrypted.
Using the TPM Security Device (Optional) When the virtual drive (PSD) does not appear You can only use the virtual drive (PSD) when you have selected the Personal Secure Drive (PSD) option during the program registration. In the load window, enter the basic user password and click OK. 3 If you click Start > Computer, you will be able to confirm that the Personal Secure Drive is created. 2 3 Note that when you have copied confidential data to the PSD, the original data files are not encrypted.
Using the TPM Security Device (Optional) Deleting the virtual drive If a virtual drive has been created, you have to delete the virtual drive before deleting the existing authentication information saved on the TPM chip. 1 2 3 4 5 6 7 Right-click over > Create/Manage. Enter the password that you entered when registering the TPM program and click Next. Select Delete selected PSD and click Next.
Chapter 3.
LCD Brightness Control Chapter 3. Settings and Upgrade You can adjust the LCD brightness in 8 levels. •• Maintaining the changed LCD brightness even after turning the computer on again The screen brightness is automatically set to the brightest level when AC power is connected and the brightness is automatically set dimmer when the computer runs on battery power to extend the battery use time.
LCD Brightness Control •• LCD bad pixels principle of computer Samsung observes the specifications regarding strict quality and reliability of LCD. But in spite of that, it is inevitable that there might be a small number of bad pixels. A large number of bad pixels can cause problems in appearance, but a small number of pixels doesn’t affect the computer performance.
Easy Settings (Optional) The Easy Settings is the integrated Samsung software control program that allows users to configure various settings. •• This description is for models that support this function running on Windows 7. •• The screen image and terminology may change depending on the model. •• Depending on the program version, some functions may not be provided or different functions may be provided. 1 2 Press the Settings.
BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. •• Use the BIOS setup to define a boot password, change the booting priority, or add a new device. •• Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. Chapter 3. Settings and Upgrade 86 Entering the BIOS Setup 1 2 Turn the computer on. When the booting screen (SAMSUNG logo) appears, press the F2 key to enter the BIOS Setup.
BIOS Setup Chapter 3. Settings and Upgrade 87 System Setup Keys The BIOS Setup Screen The BIOS Setup menus and items may differ depending on your computer model. SAMSUNG BIOS Configuration Setup Menu Help Help for the selected item appears automatically. Setup Items Setup Menu Description SysInfo This is a description about the basic specifications of the computer. Advanced Using this menu, you can configure the major chipsets and additional functions.
Setting a Boot Password Chapter 3. Settings and Upgrade 88 If you set a password, you have to enter the password when you turn the computer on or enter the BIOS Setup. 1 Select the Security menu in the BIOS Setup. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. 2 In the Set Supervisor Password item, press . 3 Enter a password, press , re-enter the password for confirmation, and press again.
Setting a Boot Password Setting a User Password Using the User Password, you can turn the computer on but you cannot change the major settings of the BIOS Setup because you cannot enter the BIOS Setup. This helps prevent unauthorized access to the major settings in the BIOS Setup menu. Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password.
Setting a Boot Password Deactivating the Password 1 Press on the password to be deactivated. For example, to deactivate a supervisor password in the Set Supervisor Password item, press . 2 In the Enter Current Password item, enter the currently configured password and press . 3 Leave the Enter New Password item field empty, and press . 4 Leave the Confirm New Password field empty, and press . The password is deactivated.
Changing the Boot Priority By default, the highest boot priority device is set to the CD-ROM/ DVD drive. As an example, the procedures to change the highest boot priority device to the hard disk drive are described below. Chapter 3. Settings and Upgrade 3 91 Press the down key (↓) to move to the SATA HDD item and press the F6 key to move up to the top item. Boot Menu [Boot Priority Order] The screen images and terms may differ from actual product depending on the computer model and driver version.
Upgrading Memory One or more memory modules are installed on the computer. There are 2 memory slots and users can replace the installed memory or add new memory. Chapter 3. Settings and Upgrade 92 Adding or Replacing Memory Modules 1 Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver. •• Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the computer is in Sleep mode.
Upgrading Memory 3 Chapter 3. Settings and Upgrade Push the memory module down so that it is completely fixed. If the memory does not fit easily, push the memory module down while pulling the memory module latches outward. 4 Close the memory compartment cover and fasten the screw. Removing a memory module Pull the memory module latches outward. The memory module will pop up. Remove the memory module out at an angle of 30 degrees.
Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. This computer is equipped with an internal battery. Precautions •• To remove or replace the battery, use an authorized service center in order to protect the product and users. You will be charged for this service. •• Use only chargers specified in the User Manual. Chapter 3.
Battery Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures. Confirming the battery charge in the Taskbar Disconnect the AC adapter and move the mouse cursor over the battery icon in the system tray of the Taskbar to confirm the remaining battery charge. Battery Usage Time Information A battery is an expendable supply, so when using it over a long time, the capacity/battery life is shortened.
Battery Chapter 3. Settings and Upgrade Installing/Removing the Battery 1 Shutdown the system, close the LCD panel and place the computer upside down on a flat surface. 2 Lift the battery latch 3 forward to remove the battery. Lift up on the battery to remove it from the compartment. 4 96 To install the battery again, slide the battery into the system. The battery latches move inwards and fix the battery automatically.
Battery Chapter 3. Settings and Upgrade 97 Using the power management program Extending the Battery Life (Optional) This program helps you use the battery more efficiently and supports the power mode optimized for the operating environment. In the Easy Settings program, click General and set the Battery Life Extender to ON or OFF. 1 Click Start > Control Panel > Hardware and Sound > Power Options.
Battery Using the Battery Calibration Function When charging/discharging the battery repeatedly for a short time only, the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display. Chapter 3. Settings and Upgrade 3 In this case, the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Calibration function, and then recharging it again.
Using the Security Slot You can secure the computer by connecting a lock and cable to the Security Slot. To use this feature, you have to purchase the lock and cable additionally. To use the lock and cable, refer to the product manual. Tie the lock and cable to a fixed object and install the other end of the cable to the security slot. Chapter 3.
Chapter 4.
Samsung Recovery Solution (Optional) Samsung Recovery Solution is a program that enables restoring or backing up the hard disk drive for when a problem occurs with the computer. If the computer fails to boot up, you can restore the computer by pressing the key in the booting screen. Chapter 4. Backup / Restore 101 Samsung Recovery Solution Functions Backup/Restore Functions Backup Function Backs up drive C or required folders and files.
Samsung Recovery Solution (Optional) System Software Functions Samsung Recovery Solution provides system software so that you can reinstall or copy the device drivers and system software necessary for normal operations onto a separate storage device. Chapter 4. Backup / Restore 1 2 If you turn the power on for the first time, the Register Windows screen appears. If you register Windows according to the instructions on the screen, the computer will be restarted.
Samsung Recovery Solution (Optional) Restoring the computer Restore is a function that enables restoring the computer to a saved point when the computer was purchased or a user-saved point. Chapter 4. Backup / Restore 2 If the initial menu screen appears, click Restore. The Restore function provides the Basic Restore and Complete Restore options. 1 – When Windows is running: Click Samsung Recovery Solution.
Samsung Recovery Solution (Optional) 3 Chapter 4. Backup / Restore Select either Basic Restore or Complete Restore from the Restore menu. 104 In the Advanced menu, you can change the size of the hard drive partitions (e.g. C: and D:). To restore the computer to the initial state, click Computer Initial State and perform the restoration process according to the instructions that appear on the screen.
Samsung Recovery Solution (Optional) Chapter 4. Backup / Restore 105 Complete Backup/Restore A Complete Backup saves the complete image of the C drive onto another drive or DVD. A Complete Restore restores the image file saved by the Complete Backup onto the C drive. Complete Backup If you perform the Complete Backup function onto a DVD or removable storage device, you can restore your computer even when a problem occurs with the hard disk or when the restoration area is removed.
Samsung Recovery Solution (Optional) 4 When the system restarts in Restoration Mode, the Complete Backup operation begins. Continue with the backup by following the instructions. •• Samsung Recovery Solution supports the DVD+R, DVD-R, DVD+RW and DVD-RW formats. •• If the LiveImaging option has been selected, the Complete Backup operation begins without the computer being restarted. 5 Continue with the Complete Backup operation by following the instructions. Chapter 4.
Samsung Recovery Solution (Optional) Complete Restore 1 Chapter 4. Backup / Restore 3 – When backing up onto DVD 107 Select a Complete Backup restoration point in the restoration point selection screen and click the Next button. The system is restarted. Turn the computer on and insert the backup DVD into the DVD drive. If there are multiple backup DVDs, insert the first DVD. – When backing up to a removable storage device Connect the removable storage device.
Samsung Recovery Solution (Optional) Chapter 4. Backup / Restore 108 Data Backup/Restore The Data Backup function enables you to backup specific files and folders to another drive, DVD or removable storage device. Data Restore enables you to restore data using the data saved by a Data Backup when data is lost. This guide describes the Backup and Restore procedures on the basis of backing up and restoring by using DVD.
Samsung Recovery Solution (Optional) Data Restore 1 – When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive. – When backing up to a removable storage device Connect the removable storage device. – When backing up to another drive Proceed to Step 2. 2 When the initial menu screen appears, click Restore and then click Data Restore. 3 Select a backup item to be restored in the backup list and click the Next button.
Samsung Recovery Solution (Optional) System Software Function The System Software function is a function that enables you to reinstall device drivers and System Software Programs or back up those programs. Chapter 4. Backup / Restore 110 Installing System Software 1 When the initial menu screen appears, click System Software > System Software Installation. 2 Move to the Easy Software Manager. 3 After the installation is complete, the computer will restart.
Samsung Recovery Solution (Optional) Chapter 4. Backup / Restore System Software Backup 1 When the initial menu screen appears, click System Software > System Software Backup. 2 Specify the Save Path. 111 If you have specified a hard disk drive or a removable disk as the Save Path, the SamsungSoftware folder is created on the corresponding drive (e.g. D:\) and the system software programs are saved to that folder. Take care to not delete the folder.
Samsung Recovery Solution (Optional) Chapter 4. Backup / Restore 112 Recovery Solution Representation (Optional) What is a Recovery Area? •• Samsung computers have an additional partition to recover computers or save backup files. (Only for models with the Samsung Recovery Solution.) This partition is called a Recovery Area and it includes a recovery image that comprises of the OS and application programs.
Chapter 5.
Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal injury and damage to your system.
Important Safety Information Chapter 5 Appendix 115 Care During Use The Instruction On Safety Operation of NotePC •• Do not walk on the power cord or allow anything to rest on it. 1. When installing and operating devices please refer to safety requirements in the user guide. •• Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. •• Some products have a replaceable CMOS battery on the system board.
Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas.
Replacement Parts and Accessories Connect and Disconnect the AC adapter The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not unplug the power cord by pulling the cable only. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment.
Regulatory Compliance Statements Wireless Guidance (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
Regulatory Compliance Statements • Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. • Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information.
Regulatory Compliance Statements Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network.
Regulatory Compliance Statements If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices.
Regulatory Compliance Statements Health and safety information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Chapter 5 Appendix 122 SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Regulatory Compliance Statements FCC Part 68 (If fitted with a modem device.) This equipment complies with part of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. This equipment uses the following USOC jacks : RJ11C An FCC compliant telephone cord and modular plug is provided with this equipment.
Regulatory Compliance Statements Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada.
Regulatory Compliance Statements When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands.
Regulatory Compliance Statements Son utilisation est soumise aux deux conditions suivantes : 1) ce dispositif ne peut pas provoquer d’interférences nuisibles et 2 2) ce dispositif doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer des anomalies dans le système. Afin de prévenir des interférences de radio au service autorisé, ce dispositif est prévu pour être utilisé à l’intérieur et éloigné des fenêtres pour fournir une protection maximum.
Regulatory Compliance Statements To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself. Contact the appropriate inspection authority or an electrician, as appropriate. The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
Regulatory Compliance Statements Brazil Chapter 5 Appendix 128 European Directives Este produto esta homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolucao 242/2000, e atende aos requisitos tecnicos aplicados.
Regulatory Compliance Statements European Radio Approval Information (for products fitted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz band, may be present (embedded) in your notebook system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Regulatory Compliance Statements Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente Samsung déclare que l’appareil Notebook PC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Regulatory Compliance Statements Íslenska [Icelandic] Hér með lýsir Samsung yfir því að Notebook PC er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Samsung erklærer herved at utstyret Notebook Norsk PC er i samsvar med de grunnleggende krav og [Norwegian] øvrige relevante krav i direktiv 1999/5/EF. Türkiye [Türkçe] Bu belge ile, Samsung bu Notebook PC’nin 1999/5/EC Yönetmeliğinin temel gerekliliklerine ve ilgili hükümlerine uygun olduğunu beyan eder.
Regulatory Compliance Statements Chapter 5 Appendix The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows: France General 2.400 - 2.454 GHz (channels 1 to 7) for outdoor use. European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz.
Regulatory Compliance Statements European Telecommunication Information (for products fitted with EU-approved modems) Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999/5/ EC.
WEEE Symbol Information Correct disposal of this product (Waste Electrical & Electronic Equipment) Chapter 5 Appendix 134 Correct disposal of batteries in this product Pb (Applicable in the European Union and other European countries with separate collection systems) (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
TCO Certified (for corresponding models only) Congratulations! Félicitations ! This product is TCO Certified for Usability and the Environment. The product you have just purchased carries the TCO Certified label. This means that your computer is designed, manufactured and tested according to some of the strictest performance and environmental criteria in the world.
Product Specifications The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalogue. CPU (Optional) Main Memory Main Chipset (Optional) Storage Device Graphics (Optional) Operating Environment Intel Core™ i7/i5/i3 Processor Chapter 5 Appendix 136 •• Optional components may not be provided or different components may be provided depending on the computer model. •• The system specifications are subject to change without notice.
Product Specifications Registered Trademarks Chapter 5 Appendix ENERGY STAR® Partner As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Samsung is a registered trademark of Samsung Co., Ltd. Intel, Pentium/Dual-Core/Quad-Core are registered trademarks of the Intel Corporation. AMD, Dual-Core/Quad-Core are registered trademarks of the AMD Corporation.
Glossary Chapter 5 Appendix 138 The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup DHCP (Dynamic Host Configuration Protocol) A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. This refers to automatically allocating IP addresses to the users on the network by the network administrators.
Glossary Chapter 5 Appendix 139 DVD (Digital Versatile Disk) Icon DVD was developed to replace CD (compact disk). Although the shape and size of the disc are the same as that of a CD, the capacity of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD video is digital unlike VHS (analog) video and supports MPEG2 compression and digital audio. To play a DVD, a DVD drive is required. This refers to a small image that represents a file that users can use.
Glossary Network Chapter 5 Appendix 140 PCMCIA( Personal Computer Memory Card International Association) card A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. The biggest network is the Internet, a worldwide network.
Glossary Chapter 5 Appendix 141 Server TCP/IPv4 In general, a server refers to a computer that provides shared resources for network users. This is a 4 byte (32 bit) address system separated into each byte (8 bits) by a dot and each byte is represented as a decimal number. Share USB (Universal Serial Bus) This refers to setting a resource of a computer such as a folder or printer so that other users can also use it.
Index Chapter 5 Appendix A AP L 70 B LCD Brightness 142 S 83 Safety Precautions Samsung Recovery Solution M 7 101 Scroll 41 Battery 94 Memory 92 Security Slot 99 BIOS Setup 86 Monitor Connection / Output 55 Shortcut Key 35 Booting Priority 91 Multi Card Slot 52 Status Indicators 27 Supervisor Password 88 C O CD Drive 49 Charge 94 Click 39 Overview T Touchpad P Password D 25 Product Specifications Double-Click 39 Drag 39 R Dual View 56 Recorder 88 136 3