User Manual (Windows 8) (ver.1.2)

86
87
Chapter 4.
Settings and Upgrade
Adding a Hard Disk Drive
3
Insert the hard disk drive to be added into the rubber cover
and connect one end of the connector to the hard disk drive.
4
Insert the hard disk drive into the auxiliary hard disk
compartment and connect the connector to the connector
port of the computer so that the white mark faces in the
right-hand direction. Check the insertion direction of
each connector before tting the HDD into the auxiliary
compartment as shown.
5
Insert the xing cover aligning the one side of the cover with
the three holes of the main body and x the other side of the
cover by fastening 2 xing screws.
Cover xing
screws
6
Close the hard disk drive compartment cover and fasten the
screw.
After installing a separately purchased hard disk drive, format
the drive referring to the hard disk drive manual, if necessary.