User Manual

63
/ 78
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
11-11. Freezer Louver Assembly
Step Description Step Description
1 5
2
3
4
□ Remark :
11. Disassemble/Assemble Procedures
※ Follow the reverse order when assembling.
Remove freezer drawers.
Press the left fixing hook of the rail system.
Holding the top of the F door, pull it out a little to
release. Repeat release the right hook as same way.
And then fully open the door to remove.
• After installing the f door, fully push and close it to align left and right rack gear tooth. And check locking rail system.
• If necessary, assemble one Gear F Rail *M in the rail system. Push and assemble another one Gear Rail F *M on
opposite side of rail.
Gear F rail *M
(Material : plastic)
Supporter F Rail
Gear *M
(Material : plastic)
Fixture F Rail *M
(Material : steel bar)
Rail System
Remove two screws.
Holding the bottom
of Louver, pull it
forward.
Be careful no to
damage the wires
in the right side.
Disconnect the connectors of F fan motor and F
sensor.