User manual
58
N It is recommended that you use crimped terminal for wiring.
Use 2mm
2
twisted pair cable or larger
• Use power supply wire that is thicker than 2mm
2
to minimize voltage drops.
• Use twisted pair cable to minimize noise effects.
Proper compressed connection terminal
• Circular type terminal (O type Lug)
• Circular type terminal with insulation resistance
• Open type terminal (Y type Lug)
Power supply system
Use separate wiring systems for the PLC module, I/O module, and
power supply module as shown in the following diagram.
Use isolation transformer for noisy environments
• Use a low noise power supply.
• Use an isolation transformer to reduce the noise as illustrated above.
N Open type terminal
N Circular terminal
7. 0 m m
or less
7. 0 m m
or less
Φ 3.7 to Φ 4.3 hole
Motor device
External I/O
device
Insulation
Insulation transformer
Insulation transformer