User manual

69
Pressure welding socket for PIN type connection
Direct pressure welding with clothings on saves wiring time and
efforts.
Wiring
1. Bend the contact part at a carrier, and set it into the pressure welding
device.
2. Insert both cables with case on until touching each other, and hold the
pressure welder slightly.
3. Insert the cables into the housing once welding is done.
Contact removal pin for wiring failure.
In case of wiring failure or cable pressure welding failure, use the
contact removal pin with the welder to remove the contact
(Matsushita Electric Industrial Co.: AXY52000)
Press the housing onto the
pressure welder for this part to
contact the contact removal pin.