User Manual

38 English
Maintenance
Maintenance
To delay starting the self-cleaning cycle
02
04 04
03
1. Repeat steps 1 and 2 on the previous page.
2. Press the Delay Start button. The oven door locks.
3. Set the time you want the oven to start self-cleaning using the number pad.
4. Press the START/SET button. The oven will start self-cleaning at your specied
time.
To cancel the self-cleaning cycle
You may nd it necessary to stop or interrupt a self-cleaning cycle due to smoke
in the oven. To turn off the self-cleaning cycle, press the OFF/CLEAR button. The
cycle turns off, but the door remains locked and the Lock icon blinks until the oven
temperature falls below 392 °F (200 °C).
After self-cleaning
The door stays locked until the internal oven temperature falls below 392 °F.
When the oven has cooled down, wipe the oven surfaces with a cloth to remove
ash residue.
Stubborn stains can be removed using a steel-wool pad. Lime deposits can be
removed using a vinegar-soaking cloth.
If you are not satised with the cleaning results, repeat the cycle. “HOT” appears
on the display until the oven cools down. Wait until the message disappears, and
start a new cycle.
The cooling fan automatically runs for certain amount of time after self-cleaning.
Self-cleaning does not operate within 2 hours after running the self-cleaning cycle.
CAUTION
Do not attempt to open the oven door immediately after the self-cleaning cycle is
complete. The oven is still very hot when the door unlocks. Escaping hot air and/or
steam could burn you.
To perform the self-cleaning cycle
Make sure the door lock is released. Remove all racks from the oven cavity.
02
03 03
1. Make sure the oven door is unlocked and closed completely.
2. Press the Self Clean button, and then select the cleaning time. See the table
below.
Once Twice Three times
2-hour cycle 3-hour cycle 4-hour cycle
3. Press the START/SET button. The oven door is locked and the oven begins to
heat up.
4. When the cycle is complete, the oven beeps 6 times. The door will remain
locked and the Lock icon will blink until the oven temperature falls below
392 °F (200 °C).
5. When the Lock icon changes to an open lock, you can open the oven door. The
Lock icon changes to an open lock when the oven temperature drops below
392 °F (200 °C).
6. Press the OFF/CLEAR button to display the time of the day.
CAUTION
Do not use the surface burners while the gas oven is performing a self-cleaning
cycle.
NX58J7750S_AA_AC_DG68-00623A-07_EN+CFR.indb 38 2018-08-30  12:22:06