User Guide

English - 66
Warming drawer
Problem Possible cause Action
Warming drawer will not
work.
The controls are not set properly. Reset the controls as described on
page 50.
The Self-Clean or Sabbath
function is being used.
The warming drawer will not
operate when either of these
functions is operating. Try
again after these functions are
completed or cancelled.
The oven controls have been
locked.
Unlock the controls and try again.
There is a blown fuse or tripped
circuit breaker.
Replace blown fuse or reset
tripped circuit breaker.
Excessive condensation
in the warming drawer.
The temperature setting is too
high.
See page 50.
The foods being warmed are not
covered with a lid or aluminum
foil.
Cover foods with a lid or
aluminum foil.
You are trying to warm liquids. Liquid should not be warmed in
the drawer. Remove liquids.
Warming drawer or
storage drawer does not
slide smoothly or drags.
The drawer is not properly aligned
with the full-extension roller
guide rails or nylon drawer guides.
Remove and replace the drawer.
(See page 60.)
The contents in the drawer are
too heavy.
Reduce the weight and/or
redistribute the contents in the
drawer.
Others
Problem Possible cause Action
The product is not level.
The appliance has been installed
improperly.
The leveling leg(s) is (are)
damaged or uneven.
Make sure the floor is level, strong,
and stable. If the floor sags or
slopes, contact a carpenter.
Check and level the range. (See
the Installation Instructions.)
The kitchen cabinets are not
properly aligned and make the
range appear to be not level.
Ensure that cabinets are square
and provide sufficient room for
installation.