User Manual

English 11
Important safety information
Important safety information
SAVE THESE INSTRUCTIONS
• Installation of this range must conform with local codes
or, in the absence of local codes, with the National Fuel
Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada,
installation must conform with the current Natural Gas
Installation Code, CAN/CGA-B149.1, or the current Propane
Installation Code, CAN/CGA-B149.2, and with local codes
where applicable. This range has been design-certied by
ETL according to ANSI Z21.1, latest edition, and Canadian
Gas Association according to CAN/CGA-1.1, latest edition.
• Due to the size and weight of the range, have two or more
people move the range.
• Remove all tape and packaging materials.
• Remove all accessories from the cooktop, oven, and/or
lower drawer. Grates and griddles are heavy. Use caution
when handling them.
• Make sure no parts came loose during shipping. Do not
install in an area exposed to dripping water or outside
weather conditions.
• Make sure your range is correctly installed and adjusted
by a qualied service technician or installer for the type of
gas (natural or LP) you will use. For your range to utilize LP
gas, the installer must replace the 5 surface burner orices
and 2 oven orices with the provided LP orice set, and
reverse the GPR adapter. These adjustments must be made
by a qualied service technician in accordance with the
manufacturer’s instructions and all codes and requirements
of the authority having jurisdiction. The qualied agency
performing this work assumes the gas conversion
responsibility.