User Manual

44 English
Maintenance
Maintenance
To apply the graphite lubricant
1. Shake the graphite lubricant before
opening it.
2. Apply 4 drops of lubricant to the inner
side of the left sliding track, and 4 drops
to the outer side of the left sliding track.
3. Repeat step 2 above on the right sliding
track.
4. Extend and collapse the gliding rack
several times to distribute the lubricant.
NOTE
• Do not use a dishwasher to clean the racks.
• If a rack does not slide in and out smoothly, apply a few drops of cooking oil
to the oven rack guides.
• If a rack becomes too difcult to slide in or out, lubricate the rack.
• To order Graphite Lubrication, call our customer center at 1-800-SAMSUNG
(726-7864).
• For online shopping, visit http://www.samsungparts.com/Default.aspx and
search for part DG81-01629A.
Racks
To keep the racks clean, remove them from the cavity, and soak them in lukewarm
soapy water. Then, scour impurities off of the racks using a plastic scouring pad.
If the racks do not slide in and out smoothly after you have cleaned them, rub the
side rail guides with wax paper or a cloth containing a few drops of cooking oil.
This will help the racks glide more easily on their tracks.
Gliding rack (NX58H9950W* Only)
1. Remove the gliding rack from the oven.
2. Fully extend the gliding rack on a table.
It is a good idea to put newspaper
beneath the rack for later cleanup.
3. If the sliding tracks are contaminated,
remove impurities using a paper towel.
Reapply the graphite lubricant according
to the instructions below: