Use and Care Manual

English - 25
04 GAS RANGE
Ignition
1
2
Make sure all surface burners are properly
installed.
1. Push in and turn the control knob to the
LITE position. You will hear a clicking” sound
indicating the electronic ignition system is
working properly.
2. After the surface burner lights, turn the
control knob to shift it out of the LITE
position and turn off the electronic ignition
system.
3. Turn the control knob to adjust the flame
level.
Manual ignition
You can ignite the burner manually in case of a power failure. Use caution when doing this.
1. Hold a long gas grill lighter to the surface burner you want to light.
2. Push in and turn the control knob for that burner to the LITE position. Turn on the grill lighter to
ignite the burner.
3. After the burner is lit, turn the control knob to adjust the flame level.
Flame level
The flames on the burners should always stay under the cookware, and should not extend beyond
the cookware bottom at any time.
WARNING Flames larger than the cookware bottom may result in a fire or physical injury.
Manual User_NX58H9500WS_DG68-00566A-01_EN_NonPF.indd 25 2014-07-30  1:01:37