Use and Care Manual

English - 57

07 MAINTENANCE

To delay starting the self-cleaning cycle

1. Repeat steps 1 and 2 on the previous page.

2. Press the Delay Start button. The oven door locks.

3. Set the time you want the oven to start self-cleaning using the number pad.

4. Press the START/SET button. The oven will start self-cleaning at your speciﬁed time.

To cancel the self-cleaning cycle

You may ﬁnd it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven. To turn

oﬀ the self-cleaning cycle, press the OFF/CLEAR button. The cycle turns oﬀ, but the door remains

locked and the Lock icon blinks until the oven temperature falls below 392 °F (200 °C).

After self-cleaning

• The door stays locked until the internal oven temperature falls below 392 °F.

• When the oven has cooled down, wipe the oven surfaces with a cloth to remove ash residue.

• Stubborn stains can be removed using a steel-wool pad. Lime deposits can be removed using a

vinegar-soaking cloth.

• If you are not satisﬁed with the cleaning results, repeat the cycle. “HOT” appears on the display

until the oven cools down. Wait until the message disappears, and start a new cycle.

CAUTION Do not attempt to open the oven door immediately after the self-cleaning cycle

is complete. The oven is still very hot when the door unlocks. Escaping hot air and/or steam

could burn you.

Manual User_NX58H9500WS_DG68-00566A-01_EN_NonPF.indd 57 2014-07-30  1:02:08