User Guide

48 English

Maintenance

How to re-install the door

You can re-install the upper door the same way you re-install the full door.

1. Firmly grasp both sides of the door at the top.

2. With the door at the same angle as the removal position, slide the indentation

of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge

arm must be fully inserted into the bottom of the slot.

Hinge arm

Indentation

Bottom edge of slot

3. Open the door fully. If the door will not open fully, the indentation is not

inserted correctly in the bottom edge of the slot.

4. Push the hinge locks up against the front frame of the oven cavity into the

locked position.

Unlocked position

Hinge lock

Locked position

5. Close the oven door.

Removing and re-installing the oven door

How to remove the door

NOTE

You can remove the upper door the same way you remove the full door.

CAUTION

• The door is very heavy. Be careful when removing and lifting the door. Do not

lift the door by the handle.

• Turn the power OFF before removing the door.

1. Open the door completely.

2. Pull the hinge locks down toward the door frame to the unlocked position.

Locked position

Hinge lock

Unlocked position

Fig. 1

about 5°

Fig. 2

3. Firmly grasp both sides of the door at

the top.

4. Close the door to the door removal

position, which is approximately

5 degrees from vertical (Fig. 1).

5. Lift the door up and out until the hinge

arm is clear of the slot (Fig. 2).