User Manual

English 27
Installation instructions
4. Press the OVEN OFF pad to shut off the
oven.
The display will show the time of day.
NOTE
The oven burners require electrical power
to operate. They cannot be lit manually with
a match, so the oven cannot be used during
power outages.
To start the broil burners:
To check ignition of the broil burner, touch
the Broil Hi/Lo Pad and then the START/SET
pad. After 30
~
90 seconds, the broil burner
will ignite.
To start the bake burners:
1. Press the Bake pad. The oven will beep
every time a pad is pressed.
The default temperature 350° will
blink on the display. If the default
temperature is the desired cooking
temperature, skip to Step 2.
2. Press the number pads to change the
temperature setting to the desired
temperature setting. The selected
cooking temperature will blink on the
display.
3. Press the START/SET pad.
The display will show a blinking •, along
with 150° and Bake until the oven
reaches that temperature; then the
display will just show the actual oven
temperature.
The oven will automatically light after
30
~
90 seconds and start preheating.
When the oven reaches the desired
baking temperature, it will beep 6 times.
Install_NX58R4311SS_AA_DG68-01153A-02_EN+MES+CFR.indb 27 2020-06-16 �� 8:30:21