User Manual
Table Of Contents
- Introducing your new range
- Surface cooking
- Operating the oven
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Introducción a su nueva estufa
- Superficie de cocción
- Funcionamiento del horno
- Paneles de control y pantallas del horno
- Ajuste del reloj
- Activación/desactivación del temporizador
- Posicionamiento de las parrillas del horno
- Ventilación del horno
- Luz del horno
- Hornear
- Cocción regida por temporizador
- Cocción temporizada diferida
- Asado a la parrilla
- Mantener caliente
- Cómo utilizar la función de Cocción fácil
- Cocción favorita
- Función Shabat
- Características adicionales
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Présentation de votre nouvelle cuisinière
- Table de cuisson
- Utilisation du four
- Tableaux de commande et affichages du four
- Réglage de l'horloge
- Activation/désactivation de la minuterie
- Positionnement des grilles du four
- Ventilation du four
- Éclairage du four
- Cuisson traditionnelle
- Cuisson minutée
- Cuisson minutée différée
- Cuisson au gril
- Maintien au chaud
- Utilisation de la fonction Cuisson facile
- Cuisson favorite
- Fonction Shabbat
- Fonctions complémentaires
- Entretien de votre appareil
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
English 23
Surface cooking
Surface cooking
WARNING
BEFORE USING THE SURFACE BURNERS, make sure to follow all the safety
warnings and precautions listed on page 7. Failure to do so could result in product
damage, personal injury, and/or death.
Lighting a gas surface burner
Make sure all surface burners are positioned and assembled properly.
1. Push in and turn the control knob to the
LITE position. You will hear a “clicking”
sound indicating the electronic ignition
system is working properly.
2. After the surface burner lights, turn the
control knob to adjust the power setting
of the surface burner and turn off the
electronic ignition system.
NOTE
We highly recommend using the right front side burner for simmering tomato
sauce and right rear side burner for melting chocolate.
Manually lighting a gas surface burner
If a power failure occurs, the surface burners can still be lit manually.
NOTE
Use extreme caution when manually lighting a surface burner.
1. Hold a long gas grill lighter to the surface burner you want to light.
2. Push in and turn the control knob for that burner to the LITE position.
3. After the burner has lit, set the control knob and the burner to the desired
setting.
Flame size selection
WARNING
Flames larger than the bottom of the cookware will not result in faster heating,
but could result in a re hazard and/or personal injury.
The ames on the burners should always stay under the cookware. The ames
should never extend beyond the bottom surface and/or up the sides of the
cookware.
Always watch the ames when adjusting the heat setting with the control knob(s).
The ames should always match the size of the cookware being used.