User Manual

32 English
Operating the oven
Operating the oven
If your baking results are not what you are used to, the preset oven
cooking temperature can be adjusted ±30 °F (±17 °C) as follows:
1. Press and hold the Bake and 0 pads for
3 seconds.
The display will show AdJ and 0.
2. Press the Bake pad to toggle between
+ or – temperature adjustments.
3. Press the number pads for the desired
temperature adjustment for example,
(1, 0).
The display will show AdJ and 10.
4. Press the START/SET pad.
The oven will beep twice, and the
display will show the time of day. The
next time you bake, the oven will use
the new temperature setting.
NOTE
This adjustment will not affect the broiling
or the self-cleaning temperatures.
The adjustment will be retained in memory
after a power failure.
4. Press the START/SET pad.
The oven will automatically light and
start preheating. The display will show
a blinking •, along with 150° and Bake,
until the oven reaches 150°. Then, the
display will just show the actual oven
temperature.
When the oven reaches the desired
baking temperature, it will beep 6 times.
5. Place the food in the oven and close the
oven door. Preheating is very important
for good baking results.
6. When baking is complete, remove the
item(s) from the oven, close the oven
door, and press the OVEN OFF pad.
The oven will shut off, and the display
will show the time of day.
To change a programmed baking temperature, press the Bake pad, enter the new
baking temperature, and then press the START/SET pad. If the oven temperature
is higher than the new setting, the oven will beep 6 times, then show the new
setting. The oven will complete cooking at the new temperature.