User Manual
Table Of Contents
- Introducing your new range
- Surface cooking
- Operating the oven
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Introducción a su nueva estufa
- Superficie de cocción
- Funcionamiento del horno
- Paneles de control y pantallas del horno
- Ajuste del reloj
- Activación/desactivación del temporizador
- Posicionamiento de las parrillas del horno
- Ventilación del horno
- Luz del horno
- Hornear
- Cocción regida por temporizador
- Cocción temporizada diferida
- Asado a la parrilla
- Mantener caliente
- Cómo utilizar la función de Cocción fácil
- Cocción favorita
- Función Shabat
- Características adicionales
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Présentation de votre nouvelle cuisinière
- Table de cuisson
- Utilisation du four
- Tableaux de commande et affichages du four
- Réglage de l'horloge
- Activation/désactivation de la minuterie
- Positionnement des grilles du four
- Ventilation du four
- Éclairage du four
- Cuisson traditionnelle
- Cuisson minutée
- Cuisson minutée différée
- Cuisson au gril
- Maintien au chaud
- Utilisation de la fonction Cuisson facile
- Cuisson favorite
- Fonction Shabbat
- Fonctions complémentaires
- Entretien de votre appareil
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
English 47
Maintaining your appliance
Stainless steel surfaces
WARNING
Do not use a steel-wool pad or abrasive cleaners on stainless steel surfaces.
Abrasive pads and cleaners will scratch the surface and damage the surface nish.
NOTE
To prevent any discolorations and/or grease stains, we recommend cleaning and
removing any spills, spots, and grease from the range after each use.
Stainless steel Stainless steel
surfacessurfaces
1. Wipe off any spills with a damp, soft
cloth.
2. Apply an approved stainless steel
cleaner to a damp, clean cloth or paper
towel. Clean a small area carefully
following the instructions on the
cleaner. Stainless steel should always be
cleaned with the grain in the stainless
steel, if applicable.
3. Dry and buff with a clean, dry, soft
cloth.
4. Repeat steps 2 and 3 as necessary.
WARNING
Do not spray any type of cleaner into the manifold panel holes. Within these
holes are ignition switches which carry the current that lights the surface burners.
Spraying into them could damage the range.