User Manual

54 English
Maintaining your appliance
Maintaining your appliance
Removing and replacing the storage drawer
To remove the storage drawer
1. Pull out the drawer and remove any
stored content.
2. While supporting the drawer, pull it out
until the top of the drawer sides come
out of the two nylon drawer guides.
Then, lift to remove the drawer.
3. Clean the drawer in warm, soapy water.
Rinse and dry thoroughly.
2. Firmly grasp both sides of the door.
3. While supporting the oven door,
insert both door hinge arms into the
slots in the bottom sides of the door
frame. When the door is held at about
5 degrees, the hinge arms will slide in
and down.
Hinge Hinge
locklock
4. Completely open the oven door. If the
door will not fully open, the hinge arms
are not correctly inserted into the slots
in the bottom of the door.
5. Lock both hinge locks. Push each lock
up against the front frame of the oven
cavity.
6. Close the door.
7. Reconnect power to the range.