User Manual

/ 78

WARNING

To avoid risk of electrical shock that can cause death or severe personal injury,

disconnect unit from power before servicing unless tests require power.

11-13. Freezer Defrost Sensor and Heater in the Evaporator Assembly

Step Description Step Description

1 5

2 6

3 7

4 8

□ Remark :

11. Disassemble/Assemble Procedures

left and right

Remove the three

connectors.

Pull out the evaporator from 2 hooks on the

back wall.

※ Follow the reverse order when assembling.

Cut the cable

ties and

remove the

defrost

sensors on left

side of Eva.

Cut the cable ties

and remove two

temp fuse covers on

right side of Eva.

• Do not miss 2 cable ties. They could block two drain holes and

the drain water will overflow into freezer.

Remove two temp

fuses of defrost heater.

remove clamping parts. (the

right side of Eva)

Bend out the lower clamping

parts (the right side of Eva)

to remove the pipe of defrost

heater.

Remove the heater from Eva.