SmartThings app 2021.01.22
4 English
SmartThings
SmartThingsSmartThings
Installation
Visit the Google Play Store, Galaxy Apps, or Apple App Store and search for
“SmartThings”. Download and install the SmartThings app provided by Samsung
Electronics to your smart device.
NOTE
• SmartThings is incompatible with tablets and some mobile devices.
- Android 6.0 or later (at least 2 GB of RAM) is recommended.
- Supported resolutions: 1280 x 720 (HD), 1920 x 1080 (FHD),
2560 x 1440 (WQHD)
• For Apple devices, iPad and some mobile devices may not be supported.
- iOS 10.0 or later / iPhone 6 or later
- Supported resolutions: 1334 x 750, 1920 x 1080
• For improved performance, the SmartThings app is subject to change without
notice or discontinued support according to the manufacturer’s policy.
• Recommended encryption systems include WPA/TKIP and WPA2/AES. Any
newer or non-standard Wi-Fi authentication protocols are not supported.
• Wireless networks may be affected by the surrounding wireless
communication environment.
• If your Internet service provider has registered the MAC address of your PC
or modem for identication, your device may fail to connect to the Internet. If
this happens, contact your Internet service provider for technical assistance.
• The rewall settings of your network system may prevent your device from
accessing the Internet. Contact your Internet service provider for technical
assistance. If this symptom continues, contact a local Samsung service center
or retailer.
• To congure the wireless access point (AP) settings, see the user manual of the
AP (router).
• Device support both Wi-Fi 2.4 GHz with IEEE 802.11 b/g/n and Soft-AP
protocols. (IEEE 802.11 n is recommended.)
• Unauthorized Wi-Fi wireless routers may fail to connect to applicable device.
Samsung account
You are required to register your Samsung account to use the app. If you don’t
have a Samsung account, follow the app’s onscreen instructions to create a free
Samsung account.
Getting started
Turn on the device (refrigerator, range, etc.) you want to connect, open the
SmartThings app on your phone, then follow the instructions below.
If a pop-up appears saying that a new device has been found, tap ADD NOW.
If a pop-up doesn’t appear, tap the + button, then select the device you want to
connect from the list of available devices.
If your device isn’t in the list of available devices, add the device manually by
selecting the device type, and then selecting the specic device model.
Follow the instructions for setting up your device.
1. Sign in to your Samsung account (if not already signed in).
2. Add the device.
3. Check the connection.
4. Find and connect to a Wi-Fi network.
5. Register the device.
6. Setup is complete. Your device will now appear as a card on the My devices
screen.
Range app
Integrated control
You can monitor and control your Range at home and on the go.
• Tap the Range icon in SmartThings to open the Range page.
• Check the operation status or notications related to your Range, and then
change options or settings if necessary.
NOTE
• Some options or settings of the Range may not be available for remote
control.
• You can only monitor your Range if there is no display (control panel).
SmartThings_Range_DG68-01085A-01_EN+MES+CFR.indb 4 2019-11-05 6:14:32