User Manual

English 51
Troubleshooting
Problem Cause Action
The oven racks are
difcult to slide.
This is normal. Apply a small amount of
vegetable oil to a paper towel,
and then wipe the edges of
the oven racks with the paper
towel. Racks become dull and
hard to slide if they are left in
the oven during a self-clean
cycle.
Fan noise. This is normal. The convection fan runs until
the function is over or the
door is opened.
The convection fan
is not working.
This is normal. The fan starts automatically
when the oven reaches the
preheat temperature.
Others
Problem Cause Action
The product is not
level.
The appliance has been
installed improperly.
The leveling leg(s) is (are)
damaged or uneven.
Make sure the oor is level,
strong, and stable. If the oor
sags or slopes, contact a
carpenter.
Check and level the range. (See
the Installation Instructions.)
The kitchen cabinets are
not properly aligned and
make the range appear to
be not level.
Ensure that cabinets are
square and provide sufcient
room for installation.
The display goes
blank.
The electrical outlet
Ground Fault Interrupter
(GFI or GFCI) has been
tripped and needs to be
reset.
Your digital control has
been damaged.
Replace fuse or reset circuit
breaker.
NX60T8711SS_AA_DG68-01220A-00_EN.indd 51 3/26/2020 9:01:06 PM