User Manual
Table Of Contents
- Important safety information
- Overview
- Before you start
- Cooktop
- Dual Door™
- Electric oven
- Maintenance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Información importante de seguridad
- Descripción general
- Antes de comenzar
- Cubierta
- Dual Door™
- Horno eléctrico
- Modo simple
- Modo doble
- Modo de cocción
- Guías de ajuste de temperatura
- Uso de las parrillas del horno
- Uso de la parrilla deslizante
- Uso del divisor
- Guía de recetas
- Modo Freidora de aire
- Sonda de temperatura (solo modo simple)
- Opciones de cocción
- Funciones especiales
- Más funciones
- Ajuste del sistema
- Control inteligente
- Control por voz
- Mantenimiento
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Informations importantes relatives à la sécurité
- Présentation
- Avant de commencer
- Table de cuisson
- Dual Door™
- Four électrique
- Mode Unique
- Mode Double
- Mode de cuisson
- Guides de réglage de la température
- Utilisation des grilles du four
- Utilisation de la grille coulissante
- Utilisation de la plaque de séparation
- Guide des recettes
- Mode Friture par application d'air
- Sonde thermique (mode Unique seulement)
- Options de cuisson
- Fonctions spéciales
- Fonctions supplémentaires
- Réglage du système
- Commande intelligente
- Commande vocale
- Entretien
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
30 English
Electric oven
Electric oven
Removing the Gliding rack
• With the Gliding rack in the "Closed"
position and the oven off and cool, grasp
the rack and frame and pull both forward
to remove.
CAUTION
Do not install the Gliding rack directly
above the Flat rack and Air fry tray.
You will not be able to install it properly
and the rack could fall.
NOTE
You can install the Gliding rack in any rack positions except the highest (level 7)
and lowest (level 1) rack position in the oven.
Using the divider
• To use twin mode operation, insert the divider.
• You cannot use the Self-Clean or Steam-Clean functions when the divider is
installed in the oven cavity.
• Handle the divider with both hands.
• Use oven gloves when inserting or removing the divider.
To Install the Divider into the Oven Cavity
1. Insert the divider into the 4th rack
position of the cavity.
2. Push the divider in until its back end
rests against the back of the cavity.
3. If the divider is installed correctly, the "-"
icon appears on the display.
CAUTION
If the range displays "-dC-"
• Check the divider to see if it is installed correctly.
To Insert the Divider into the Divider Storage Location
1. Open the Storage drawer.