User Manual
Table Of Contents
- Important safety information
- Overview
- Before you start
- Cooktop
- Dual Door™
- Electric oven
- Maintenance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Información importante de seguridad
- Descripción general
- Antes de comenzar
- Cubierta
- Dual Door™
- Horno eléctrico
- Modo simple
- Modo doble
- Modo de cocción
- Guías de ajuste de temperatura
- Uso de las parrillas del horno
- Uso de la parrilla deslizante
- Uso del divisor
- Guía de recetas
- Modo Freidora de aire
- Sonda de temperatura (solo modo simple)
- Opciones de cocción
- Funciones especiales
- Más funciones
- Ajuste del sistema
- Control inteligente
- Control por voz
- Mantenimiento
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Informations importantes relatives à la sécurité
- Présentation
- Avant de commencer
- Table de cuisson
- Dual Door™
- Four électrique
- Mode Unique
- Mode Double
- Mode de cuisson
- Guides de réglage de la température
- Utilisation des grilles du four
- Utilisation de la grille coulissante
- Utilisation de la plaque de séparation
- Guide des recettes
- Mode Friture par application d'air
- Sonde thermique (mode Unique seulement)
- Options de cuisson
- Fonctions spéciales
- Fonctions supplémentaires
- Réglage du système
- Commande intelligente
- Commande vocale
- Entretien
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
English 61
Troubleshooting
Problem Cause Action
The display goes
blank.
The electrical outlet
Ground Fault Interrupter
(GFI or GFCI) has been
tripped and needs to be
reset.
Your digital control has
been damaged.
Replace fuse or reset circuit
breaker.
Food does not
bake or roast
properly in the
oven.
The wrong cooking mode
is selected.
See page 23.
The oven racks have not
been positioned properly
for the foods being
cooked.
See page 27.
Incorrect cookware or
cookware of improper
size is being used.
See page 17.
The oven thermostat
needs adjustment.
See page 42.
There is aluminum foil on
racks or oven bottom.
Remove foil.
The clock or timers are
not set correctly.
See page 16.
Food does not
broil properly in
the oven.
The oven controls are not
set properly.
See page 32.
The oven door was not
closed during broiling.
See page 32.
The rack has not been
properly positioned.
See the broiling guide on page
33.
Information codes
Code
symbol
Meaning Solution
Oven sensor malfunction.
1. Tap OFF, and then restart the
oven.
2. If the problem persists,
disconnect all power to
the oven range for at
least 30 seconds and then
reconnect the power.
The oven is overheating.
Check the Control PBA NTC
Sensor.
Temp probe malfunction.
Check the PBA NTC Sensor.
Check the PBA NTC Sensor.
Check the cooling system.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal
malfunction.