User Manual
Table Of Contents
- Important safety information
- Overview
- Before you start
- Cooktop
- Dual Door™
- Electric oven
- Maintenance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Información importante de seguridad
- Descripción general
- Antes de comenzar
- Cubierta
- Dual Door™
- Horno eléctrico
- Modo simple
- Modo doble
- Modo de cocción
- Guías de ajuste de temperatura
- Uso de las parrillas del horno
- Uso de la parrilla deslizante
- Uso del divisor
- Guía de recetas
- Modo Freidora de aire
- Sonda de temperatura (solo modo simple)
- Opciones de cocción
- Funciones especiales
- Más funciones
- Ajuste del sistema
- Control inteligente
- Control por voz
- Mantenimiento
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Informations importantes relatives à la sécurité
- Présentation
- Avant de commencer
- Table de cuisson
- Dual Door™
- Four électrique
- Mode Unique
- Mode Double
- Mode de cuisson
- Guides de réglage de la température
- Utilisation des grilles du four
- Utilisation de la grille coulissante
- Utilisation de la plaque de séparation
- Guide des recettes
- Mode Friture par application d'air
- Sonde thermique (mode Unique seulement)
- Options de cuisson
- Fonctions spéciales
- Fonctions supplémentaires
- Réglage du système
- Commande intelligente
- Commande vocale
- Entretien
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
42 English
Electric oven
Electric oven
Language
Select a preferred language from English, French. You can not change the language
during cooking.
1. Tap and hold
for 3 seconds.
2. Select Language using the dial knob.
3. Turn the dial knob to select Language and push to save the changes.
Temp. Unit (°F or °C)
Change the temperature format of the oven to Fahrenheit or Centigrade. The
default is Fahrenheit.
1. Tap and hold
for 3 seconds.
2. Select Temperature unit using the dial knob.
3. Turn the dial knob to select unit and push to save the changes.
Calibrate Temperature
The oven temperature has been calibrated at the factory. When rst using the
oven, follow the recommended recipe times and temperatures. If it appears that
the oven is too hot or too cool, you can recalibrate the oven temperature. Before
recalibrating, test a recipe by using a temperature setting that is higher or lower
than recommended. The baking results should help you decide how much of an
adjustment is needed. The oven temperature can be adjusted by ±35 °F (±19 °C).
1. Tap and hold
for 3 seconds.
2. Select Calibrate Temp using the dial knob.
3. Turn the dial knob to adjust temperature value.
4. Push the dial knob to save the changes.
NOTE
This adjustment does not affect the broiling or the self-cleaning temperature, and
is retained in memory after a power failure.
My Pattern
This function remembers and stores the cook settings frequently used by the user.
1. Tap and hold
for 3 seconds.
2. Select My Pattern using the dial knob.
3. Turn the dial knob to select On/Off and push to save the changes.
Default Cavity
One cavity will be selected as a default in twin mode when oven turns on.
1. Tap and hold
for 3 seconds.
2. Select Default Cavity using the dial knob.
3. Turn the dial knob to select Upper or Lower and push to save the changes.
Welcome Lighting
Lighting pattern will be shown on cooktop knobs when the oven display wakes up.
1. Tap and hold
for 3 sec.
2. Select Welcome Lighting using the dial knob.
3. Turn the dial knob to select On/Off and push to save the change.
Demo mode
This is used by retailers for display purposes only. In this mode, the heating
element does not operate.
1. Tap and hold
for 3 seconds.
2. Select Demo mode using the dial knob.
3. Turn the dial knob to select On/Off and push to save the changes.
Reset
Reset your oven th its factory default settings. This will erase all data and can't be
recovered.
1. Tap and hold
for 3 seconds.
2. Select Reset using the dial knob.
3. Turn the dial knob to select Cancel/Reset.