User Manual
Table Of Contents
- Important safety information
- Overview
- Before you start
- Cooktop
- Dual Door™
- Electric oven
- Maintenance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Información importante de seguridad
- Descripción general
- Antes de comenzar
- Cubierta
- Dual Door™
- Horno eléctrico
- Modo simple
- Modo doble
- Modo de cocción
- Guías de ajuste de temperatura
- Uso de las parrillas del horno
- Uso de la parrilla deslizante
- Uso del divisor
- Guía de recetas
- Modo Freidora de aire
- Sonda de temperatura (solo modo simple)
- Opciones de cocción
- Funciones especiales
- Más funciones
- Ajuste del sistema
- Control inteligente
- Control por voz
- Mantenimiento
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Informations importantes relatives à la sécurité
- Présentation
- Avant de commencer
- Table de cuisson
- Dual Door™
- Four électrique
- Mode Unique
- Mode Double
- Mode de cuisson
- Guides de réglage de la température
- Utilisation des grilles du four
- Utilisation de la grille coulissante
- Utilisation de la plaque de séparation
- Guide des recettes
- Mode Friture par application d'air
- Sonde thermique (mode Unique seulement)
- Options de cuisson
- Fonctions spéciales
- Fonctions supplémentaires
- Réglage du système
- Commande intelligente
- Commande vocale
- Entretien
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
50 English
Maintenance
Maintenance
Burner reinstall guide
Dual burner head
1. Orient the burner head so that the
opening for the electrode lines up with
the electrode.
2. Install the burner head so that the
electrode passes through the opening for
the electrode. Make sure the burner head
lies at on the stove top.
Round burner head
1. Orient the burner head so that the
opening for the electrode lines up with
the electrode.
2. Install the burner head so that the
electrode passes through the opening for
the electrode. Make sure the burner head
lies at on the stove top.
Oval burner
1. Orient the burner head so that the
opening for the electrode lines up with
the electrode.
2. Install the burner head so that the
electrode passes through the opening for
the electrode. Make sure the burner head
lies at on the stove top.
Burner cap
1. Match the burner caps to the burners by
size, and then reinstall the caps on the
burner heads.
CAUTION
Make sure each cap is reinstalled on the
correct burner head, is centered on the
burner head, and lies at.