User Manual

48 English

Maintenance

Brass burner head

NOTE

• The brass parts of your burner will change

color with use. However, this will not

affect performance and you can clean the

brass parts with a brass cleaner.

• After cleaning, conrm that the burner

port openings aren't plugged.

• Do not wash any burner components in a

dish washer.

CAUTION

• The starter electrodes are not removable. Do not attempt to remove them by

force.

• To avoid chipping, do not bang grates and caps against each other or against

hard surfaces, such as cast iron cookware.

• The burner spreader can be blocked by food or dust. Clean the spreader if it

appears blocked. If you clean the spreader with water, assemble it only after it is

completely dry. If the spreader is wet, it might prevent the burners from igniting.

• To avoid falling down the grates, make sure to remove both sides grates rst.

Burner reinstall guide

Dual burner head

1. Orient the burner head so that the

opening for the electrode lines up with

the electrode.

2. Install the burner head so that the

electrode passes through the opening for

the electrode. Make sure the burner head

lies at on the stove top.

Round burner head