User Manual
Table Of Contents
- Important safety instructions
- Before you start
- Operation
- Residual heat indicator
- Switching the appliance on
- Select cooking zone and heat setting
- Using keep warm
- Power boost control
- Power management
- Switching the appliance off
- Quick stop
- Pause
- Using the child safety lock
- Timer
- Sound on/off
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Protecting the cooktop surface
- Using the SmartThings connect feature
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Appendix
- Instrucciones de seguridad importantes
- Antes de comenzar
- Operación
- Indicador de calor residual
- Encendido del electrodoméstico
- Selección de la zona de cocción y la regulación de calor
- Función para mantener caliente
- Control de Más Potencia
- Gestión de potencia
- Apagado del electrodoméstico
- Parada rápida
- Pausa
- Uso del bloqueo para niños
- Temporizador
- Activar/Desactivar las señales sonoras
- Antes de usar la cubierta
- Utensilio de cocina para zonas de cocción por inducción
- Uso del tamaño de utensilio de cocina correcto
- Tamaño de ollas y sartenes
- Ruidos de funcionamiento
- Usar utensilios de cocina adecuados para inducción
- Detección de temperatura
- Protección de la superficie de cocción
- Función de conexión SmartThings
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Apéndice
- Consignes de sécurité importantes
- Avant de commencer
- Fonctionnement
- Témoin de chaleur résiduelle
- Mise en marche de l’appareil
- Sélectionnez la zone de cuisson et de réglage de température.
- Utilisation de la fonction garder au chaud
- Commande Pleine Puissance
- Gestion de puissance
- Mettre l’appareil en arrêt
- Arrêt rapide
- Pause
- Utilisation du verrouillage de sécurité pour enfants
- Minuterie
- Son activé/déactivé
- Avant d'utiliser la table de cuisson
- Récipients pour les zones de cuisson à induction
- Utiliser des récipients de taille adaptée
- Tailles de récipients et de casseroles
- Bruits de fonctionnement
- Utilisation des récipients adaptés à la cuisson à induction
- Détection de la température
- Protection de la surface lisse
- Utilisation de la fonction SmartThings connect
- Entretien de votre appareil
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
- Annexe
18 English
Before you start
Before you start
Digital display
•
to , selected heat settings.
•
Residual heat (Still Hot).
•
Residual heat.
•
The child lock is activated.
•
message. A touch key has been touched and held for more than 8 seconds.
•
message. The cooktop has overheated because of abnormal operation.
•
The cookware is unsuitable or too small or no cookware has been placed
on the cooking zone.
(Example : An element was turned on with empty cookware on top.)
• message. The power applied to the cooktop is too high or low.
Safety shutoff
• If the cooktop overheats because of abnormal operation,
will be displayed
and the cooktop will turn off.
• If cookware is unsuitable, too small, or no cookware has been placed on the
cooking zone,
will be displayed.
After 1 minute, the corresponding cooking zone will turn off.
Other reasons why a cooking zone will switch itself off
All cooking zones will switch themselves off if liquid boils over and lands on the
control panel.
The automatic shutoff will also be activated if you place a damp cloth on the
control panel. In both of these instances, you will need to turn the cooktop on
again using the main Power
key after the liquid or the cloth has been removed.
Operation
Residual heat indicator
When an individual cooking zone or the cooktop is turned off, the presence of
residual heat is shown with an
, (for “hot”) in the digital display of the
appropriate cooking zones. Even after the cooking zone has been switched off, the
residual heat indicator goes out only after the cooking zone has cooled.
You can use the residual heat for thawing or keeping food warm.
NOTE
The uppercase '
' indicates higher temperatures than the lowercase ' '.
WARNING
As long as the residual heat indicator is illuminated, there is a risk of burns.
WARNING
If the power supply is interrupted, the
, symbol will go out and information
about residual heat will no longer be available.
However, it may still be possible to burn yourself. This can be avoided by always
taking care when near the cooktop.
Switching the appliance on
1. The appliance is switched on using the
Power
key.
Touch the Power
key for
approximately 1
~
2 seconds.
The digital displays will show .
NOTE
After the Power
key has been touched to switch on your appliance, a heat
setting must be selected within approximately 20 seconds. Otherwise, the
appliance will switch itself off for safety reasons.