User Manual
Table Of Contents
- Important safety instructions
- Before you start
- Operation
- Switching the appliance on
- Selecting a cooking zone and power setting
- Switching the appliance off
- Using the child lock
- Timer
- Power boost control
- Power management
- Pause
- Flex zone
- Sound on/off
- Virtual flame on/off
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Protecting the cooktop surface
- Using the smart connect feature
- Using the hood control feature
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Appendix
- Instrucciones de seguridad importantes
- Antes de comenzar
- Operación
- Encendido del electrodoméstico
- Selección de una zona de cocción y un ajuste de potencia
- Apagado del electrodoméstico
- Uso del bloqueo para niños
- Temporizador
- Control de más potencia
- Gestión de potencia
- Pausa
- Zona Flex
- Activar o desactivar las señales sonoras
- Encendido/apagado de la llama virtual
- Antes de usar la cubierta
- Utensilio de cocina para zonas de cocción por inducción
- Uso del tamaño de utensilio de cocina correcto
- Tamaño de ollas y sartenes
- Ruidos de funcionamiento
- Usar utensilios de cocina adecuados para inducción
- Detección de temperatura
- Protección de la superficie de cocción
- Uso de la función de conexión inteligente
- Uso de la función de control de campana
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Apéndice
- Consignes de sécurité importantes
- Avant de commencer
- Fonctionnement
- Mise sous tension de l'appareil
- Sélectionner une zone de cuisson et un réglage de puissance
- Mise hors tension de l'appareil
- Utilisation de la fonction sécurité enfants
- Minuterie
- Commande pleine puissance
- Gestion de la puissance
- Pause
- Zone flex zone
- Activation/désactivation du son
- Activation/désactivation de la flamme virtuelle
- Avant d'utiliser la table de cuisson
- Récipients pour les zones de cuisson à induction
- Utiliser des récipients de taille adaptée
- Tailles de récipients et de casseroles
- Bruits de fonctionnement
- Utilisation des récipients adaptés à la cuisson à induction
- Détection de la température
- Protection de la surface lisse
- Utilisation de la fonction connexion intelligente
- Utilisation de la fonction de contrôle de la hotte
- Entretien de votre appareil
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
- Annexe
34 English
Warranty
Information codes
Displayed
code
Possible cause Solution
C0
The top sensor is open when
the burner is operating.
Turn off the cooktop and then restart. If
the problem continues, unplug the power
cord for 30 seconds or more and then
reconnect. If the problem is not xed,
please contact a local Samsung service
center.
The top sensor is short when
the burner is operating.
C1
This code appears if the
internal temperature of a
burner rises abnormally high.
C2
The IGBT sensor is open when
the burner is operating.
The IGBT sensor is short when
the burner is operating.
d0
The key is pressed for more
than 8 seconds.
Check if the key pad is wet or a key is
depressed. If the problem continues,
restart the appliance using the POWER
button. If the problem still continues,
contact a local Samsung service center.
F0
Communications between
main and sub PCBs failed.
Restart the appliance using the POWER
button. If the problem continues,
disconnect power for more than 30
seconds. Then, restart the appliance. If
the problem still continues, contact a local
Samsung service center.
F1
Communications between
main and EEP-ROM failed.
F2
The touch-enabled IC
communicates abnormally.
UP The voltage is too high or low.
Check the power connection and make
sure to turn the appliance on after
regulating the voltage (208 V to 240 V).
A2 DC Motor Locking Information
It occurs when DC Motor cannot operate
due to defects of PCB, wiring or blockage
of on motor blade.
Warranty (U.S.A)
PLEASE DO NOT DISCARD. THIS PAGE REPLACES THE WARRANTY PAGE IN
THE USE & CARE GUIDE
SAMSUNG ELECTRIC COOKTOP
LIMITED WARRANTY TO ORIGINAL PURCHASER WITH PROOF OF PURCHASE
This SAMSUNG brand product, as supplied and distributed by SAMSUNG
ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in the original
carton to the original consumer purchaser, is warranted by SAMSUNG against
manufacturing defects in materials or workmanship for the limited warranty
period, starting from the date of original purchase, of:
One (1) Year Parts and Labor
Five (5) Years Glass Cooktop Part and Radiant Heater Part (Parts Only)
This limited warranty is valid only on products purchased and used in the United
States that have been installed, operated, and maintained according to the
instructions attached to or furnished with the product. To receive warranty service,
the purchaser must contact SAMSUNG at the address or phone number provided
below for problem determination and service procedures. Warranty service can
only be performed by a SAMSUNG authorized service center. The original dated
bill of sale must be presented upon request as proof of purchase to SAMSUNG or
SAMSUNG’s authorized service center to receive warranty service.
SAMSUNG will provide in-home service within the contiguous United States
during the warranty period at no charge, subject to availability of SAMSUNG
authorized servicers within the customer’s geographic area. If in-home service is
not available, SAMSUNG may elect, at its option, to provide transportation of the
product to and from an authorized service center. If the product is located in an
area where service by a SAMSUNG authorized servicer is not available, you may
be responsible for a trip charge or required to bring the product to a SAMSUNG
authorized service center for service.
To receive in-home service, product must be unobstructed and accessible to the
service agent.
NZ30K7880U_DG68-00823A-07_EN+MES+CFR.indb 34NZ30K7880U_DG68-00823A-07_EN+MES+CFR.indb 34 2022-11-23 오후 1:46:402022-11-23 오후 1:46:40