er Manual
Table Of Contents
- Important safety instructions
- Before you start
- Operation
- Switching the appliance on
- Selecting a cooking zone and power setting
- Switching the appliance off
- Using the child lock
- Timer
- Power boost control
- Power management
- Pause
- Flex zone
- Sound on/off
- Virtual flame on/off
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Protecting the cooktop surface
- Using the smart connect feature
- Using the hood control feature
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Appendix
- Instrucciones de seguridad importantes
- Antes de comenzar
- Operación
- Encendido del electrodoméstico
- Selección de una zona de cocción y un ajuste de potencia
- Apagado del electrodoméstico
- Uso del bloqueo para niños
- Temporizador
- Control de más potencia
- Gestión de potencia
- Pausa
- Zona Flex
- Activar o desactivar las señales sonoras
- Encendido/apagado de la llama virtual
- Antes de usar la cubierta
- Utensilio de cocina para zonas de cocción por inducción
- Uso del tamaño de utensilio de cocina correcto
- Tamaño de ollas y sartenes
- Ruidos de funcionamiento
- Usar utensilios de cocina adecuados para inducción
- Detección de temperatura
- Protección de la superficie de cocción
- Uso de la función de conexión inteligente
- Uso de la función de control de campana
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Apéndice
- Consignes de sécurité importantes
- Avant de commencer
- Fonctionnement
- Mise sous tension de l'appareil
- Sélectionner une zone de cuisson et un réglage de puissance
- Mise hors tension de l'appareil
- Utilisation de la fonction sécurité enfants
- Minuterie
- Commande pleine puissance
- Gestion de la puissance
- Pause
- Zone flex zone
- Activation/désactivation du son
- Activation/désactivation de la flamme virtuelle
- Avant d'utiliser la table de cuisson
- Récipients pour les zones de cuisson à induction
- Utiliser des récipients de taille adaptée
- Tailles de récipients et de casseroles
- Bruits de fonctionnement
- Utilisation des récipients adaptés à la cuisson à induction
- Détection de la température
- Protection de la surface lisse
- Utilisation de la fonction connexion intelligente
- Utilisation de la fonction de contrôle de la hotte
- Entretien de votre appareil
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
- Annexe
32 English
Troubleshooting
Potential for permanent damage to the glass surface
• Sugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can
cause pitting of the surface of your cooktop. This is not covered under the
warranty. You should clean the spill while it is still hot. Take special care when
removing hot substances. Refer to the section below.
• When using a scraper, be sure it is new and the razor blade is still sharp. Do
not use a dull or nicked blade.
Cleaning sugary spills and melted plastic
1. Turn off all surface units. Remove hot pans.
2. Wearing an oven mitt, use a single-edge razor-blade scraper to move the spill
to a cool area of the cooktop. Remove the spill with paper towels.
3. Any remaining spillover should be left until the surface of the cooktop has
cooled.
4. Don’t use the surface units again until all of the residue has been completely
removed.
NOTE
If pitting or indentations in the glass surface have already occurred, the cooktop
glass will have to be replaced. In this case, service will be necessary.
Troubleshooting
Troubleshooting
Samsung works hard to ensure that you don’t have problems with your new
electric cooktop. If you run into unexpected trouble, look rst for a solution in the
tables below. If you’re still having trouble after trying the suggested solution, call
Samsung at 1-800-SAMSUNG (1-800-726-7864).
Problem Possible cause Solution
The surface units
will not maintain
a rolling boil or
will not cook fast
enough.
You may be using
inappropriate cookware.
Use pans which are at and
match the diameter of the
surface unit selected.
In some areas, the power
(voltage) may be low.
Cover the pan with a lid until
the desired heat is obtained.
The surface units
will not turn on.
A fuse in your home may be
blown or a circuit breaker
may have tripped.
Replace the fuse or reset the
circuit breaker.
The cooktop controls are set
improperly.
Check if the correct control is
set for the surface unit you
are using.
Areas of
discoloration on
the cooktop.
Food spillover was not
cleaned.
Refer to the section on the
care and cleaning of the glass
cooktop on page 30.
The surface is hot and the
model features a light-
colored cooktop.
This is normal. The surface
may appear discolored when
it is hot. This is temporary
and will disappear as the
glass cools.
NZ30K7880U_DG68-00823A-06_EN+MES+CFR.indb 32 2018-08-29 2:28:00