User Manual

61
/ 78
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
□ Remark :
11. Disassemble/Assemble Procedures
※ Follow the reverse order when assembling.
Step Description Step Description
1 5
2 6
3 7
4 8
□ Remark :
right Remove the
three connectors.
Pull out the evaporator from
shape on the back wall.
Cut the cable ties
and remove the
defrost sensors
on right side of
Eva.
Cut the cable ties
and remove two
temp fuse covers on
left and right side of
Eva.
• Do not miss 4 cable ties. They could block two drain holes and
the drain water will overflow into freezer.
remove clamping parts.
(the left and right side
of Eva)
11-9. Refrigerator Defrost Sensor and Heater in the Evaporator Assembly
Bend out the lower clamping
parts (the left and right side
of Eva) to remove the pipe of
defrost heater.
Remove the heater from Eva.