Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-74 © SAMSUNG Electronics Co., Ltd.
301 Assign Station COS
Used to assign class of service to each phone. There are 30 different classes of
service that are defined in MMC 701, Assign COS Contents. There are 6 ring plans
based on the Ring Plan Time in MMC 507 that can apply to the COS. Classes of
service are numbered 01-30. Default is COS 01.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 301
Display shows first station
[201] STN COS
1:01 2:01 3:01
2. Dial station number(e.g., 205)
OR
[205] STN COS
1:01 2:01 3:01
Use Volume button to scroll through stations
Press Right Soft button to advance step 3
OR
Use Volume button to scroll through stations and
press Left Soft button to advance Step 4
OR
Press ANS/RLS button to select all stations
[ALL] STN COS
1:01 2:01 3:01
3. Enter new ring plan selection via dial keypad
OR
[205] STN COS
1:01 2:01 3:01
Press Volume button to make selection OR
press Right Soft button to move cursor
4. Enter ring plan class of service(e.g., 05)
OR
[205] STN COS
1:05 2:01 3:01
Use Volume button to scroll through classes of
service and press Right Soft button to advance
the next ring plan.