Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-80 © SAMSUNG Electronics Co., Ltd.
304 Assign Extension/Trunk Use
Allows trunk use groups on a per-station use group basis the ability to answer
incoming calls, to dial out or to do both. If a station is set to NO Dial, the station will
not have the ability to place a call. If the station is set to NO Answer, the station
cannot answer an incoming call.
Stations are set within the use group number 001-300 and trunks are within the use
group number 301-500 at MMC 614. ASSIGN USE GROUP.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 304
Display shows
(001) USE (301)
DIAL:YES ANS:YES
2. Dial the station use group number(e.g., 005)
OR
(005) USE (301)
DIAL:YES ANS:YES
Press Volume button to select station use group
and press Right Soft button
OR
Press ANS/RLS button to select all station use
(ALL) USE (301)
DIAL:YES ANS:YES
Group
3. Dial the station use group number(e.g., 304)
OR
(005) USE (304)
DIAL:YES ANS:YES
Press Volume button to select trunk use group
and press Right Soft button
OR
Press ANS/RLS button to select all trunk use
(005) USE (ALL)
DIAL:YES ANS:YES
group