Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-82 © SAMSUNG Electronics Co., Ltd.
305 Assign Forced Code
This MMC allows only one of the four options to be selected; the assignment of
account code with verification, account code without verification, authorization
codes, or none on a per-station basis or on an all-station basis. The system supports
100 authorization codes. The system supports 200 account codes that are verified
when account codes verified is selected. If account codes without verification is
selected, then there will be no table used.
No Code Type Description
0 NONE No Account or Authorization code required
(NOT forced strictly voluntary).
1 AUTHORIZE CODE Forces user to enter a valid over four digit Authorization code listed
in AUTHORIZATION CODE Table(MMC 707).
2 ACCT VERIFIED Forces user to enter a valid account code listed in ACCOUNT
CODE Table(MMC 708).
3 ACCT NO VERIFIED Forces user to enter an account code but this code is NOT
verified. User can make up any code
(any account code up to 12 digits including
∗
and #).
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 305
Display shows
[201] FORCD CODE
NONE
2. Dial station number(e.g., 205)
OR
[205] FORCD CODE
NONE
Press Volume button to select station and press
Right Soft button to move cursor
3. Dial a feature option 0-3(e.g., 2)
OR
[205] FORCD CODE
ACCT VERIFIED