Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

310 LCR Class Of Service

Assigns the LCR class of service allowed on a per-station basis. There are eight

classes which may be assigned. LCR class of service allows specific users to trunk

advance up to a matching LCR class of service programmed in MMC 712.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ANS/RLS Used to select ALL

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 310

Display shows

[201] LCR CLASS

LCR CLASS 1

2. Dial station number(e.g., 205)

[205] LCR CLASS

LCR CLASS 1

Press Volume button to select station and press

Right Soft button to move cursor

Press ANS/RLS button to select All stations

[ALL] LCR CLASS

LCR CLASS ?

3. Dial 1-8 to select class type(e.g., 3)

[205] LCR CLASS

LCR CLASS 3

Press Volume button to select class type and

press Right Soft button to return to step 2

4. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

LEAST COST ROUTING COS : 1