Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-90 © SAMSUNG Electronics Co., Ltd.
312 Allow Caller ID
Allows the system administrator or technician to allow or deny CID data to be send
or displayed at with LCD phones.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 312
Display shows
[201] CID/ANI
RCV:YES SND:YES
2. Dial station number(e.g., 205)
OR
[205] CID/ANI
RCV:YES SND:YES
Press Volume button to select station and press
Right Soft button to move cursor
OR
Press ANS/RLS button to select ALL
[ALL] CID/ANI
RCV:YES SND:YES
3. Dial 0 or 1 to select receive option
OR
[205] CID/ANI
RCV:YES SND:YES
Press Volume button to select receive option and
press Right Soft button to move cursor
4. Dial 0 or 1 to select send option
OR
[205] CID/ANI
RCV:YES SND:YES
Press Volume button to select send option and
press Right Soft button to return to step 2.
5. Press Transfer button and enter to exit
OR
Press Speaker button to save and advance to next
MMC