Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-97
316 Copy Station/Trunk Use
Provides a tool for duplicating station/trunk use assignments in MMC 304 from one
station user group to another. This can be done on a per-station use group basis or on
all station use groups.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 316
Display shows
(001] CPY USABLE
FROM:NONE
2. Enter station use group number(e.g., 005)
OR
(005] CPY USABLE
FROM:NONE
Press Volume buttons to make selection and press
Right Soft button to move cursor
3. Enter station use group number to copy from
Cursor is returned to step 2
(005) CPY USABLE
FROM:003
OR
Press Volume button to make selection
4. Press Right Soft button to return to step 2
OR
Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
NONE
RELATED ITEMS
MMC 304 ASSIGN EXTENSION/TRUNK USE
MMC 317 ASSIGN STATION/STATION USE
MMC 428 ASSIGN TRUNK/TRUNK USE
MMC 614 STATION/TRUNK USE GROUP