Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-100 © SAMSUNG Electronics Co., Ltd.
318 Distinctive Ringing
Allows the technician to select the ring tone heard at a phone when called by a
specific station or when a specific trunk rings that phone. There is also a cadence
control option to perform a similar function for single line sets. There are eight ring
tones available along with a Follow Station(F-STN) option for the phones. There are
5 cadences and a follow station option for SLT’s.
TONE OPTION
Tone Option Description
F-STN Calls will ring with the phone users choice of ring frequency.
1-8 Calls from the programmed station or trunk will ring phones with this ring
frequency.
CADENCE OPTION
Cadence Option Description
F-STN Calls will ring with the normal SLT ring cadences.
1 Calls from the programmed station or trunk will ring SLT’s with the intercom ring
cadence.
2 Calls from the programmed station or trunk will ring SLT’s with the CO ring
cadence.
3 Calls from the programmed station or trunk will ring SLT’s with the DOOR ring
cadence.
4 Calls from the programmed station or trunk will ring SLT’s with the ALARM ring
cadence.
5 Calls from the programmed station or trunk will ring SLT’s with the CALLBACK ring
cadence.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL