Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-103
320 Preset Forward No Answer
Allows a technician to assign a default destination for FNA to each station on the
system. These destinations may be different for each station or they may be the same.
The preset FNA destination will be temporarily overwritten if the station user enters a
different FNA destination. If you cancel the new destination, the preset destination
will once more be in effect. Preset Forward No Answer time follows the station no
answer forward timer.
Preset forward no answer can be assigned respectively for each type of call.
No Call Type Description
0 INT Preset forward no answer applies only to intercom call.
1 EXT Preset forward no answer applies only to incoming call.
2 BOTH Preset forward no answer applies to both intercom and incoming call.
If MMC 210. PRE FWD BUSY sets ON, the forward busy follows this feature.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 320
Display shows
[201] PRESET FNA
NONE OPT:BOTH
2. Dial station number(e.g., 205)
OR
[205] PRESET FNA
NONE OPT:BOTH
Press Volume button to select station and press
Right Soft button to move cursor
OR
Press ANS/RLS button to select all stations
[ALL] PRESET FNA
NONE OPT:BOTH
3. Dial valid number via keypad
OR
[205] PRESET FNA
202 OPT:BOTH