Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

400 Customer On/Off per Trunk

Assigns several options(listed below) on a per-trunk basis.

No Options Default Description

0 1A2 EMULATION OFF When this option is set to ON up to 4 internal stations

can participate in a conversation on this trunk by

pressing the trunk key.

1 TRUNK INC DND OFF When this option is set to ON a trunk that is programmed

to ring a specific station(a private line or DIL) will ring at

that station if the station is in DND.

2 TRUNK FORWARD ON When this option is set to OFF this trunk will not follow a

ringing stations call forwarding.

2 LCR ALLOW OFF When this option is set to ON, if the station access this

trunk will re-route via LCR outgoing. This feature

available in Australia, New Zealand, Italy and U.K. only

4 MOH/BGM USE OFF When this option is set to ON, this trunk uses MOH

source. This feature available Australia’s 8TRK/7TRK only.

6 EFWD EXT CLI ON This option determines what kinds of CLI number will be

sent to the external forwarded outgoing call.

(Station or Received CLI from Trunk)

7 REPEAT CLI ON This option determines what kinds of CLI number will be

sent to the trunk to trunk call.

(Trunk or Received CLI from Trunk)

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ANS/RLS Used to select ALL