Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

401 Trunk Line/PBX Line

Used to select the mode of the Trunk line. If the PBX mode is chosen, this allows

PBX access codes to be recognized, thus allowing more complete toll restriction(call

barring). This mode is assigned on a per-trunk basis.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ANS/RLS Used to select ALL

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 401

Display shows

[701] PBX LINE

CO LINE

2. Dial trunk number(e.g., 704)

[704] PBX LINE

CO LINE

Use Volume button to scroll through trunk

numbers and press Right Soft button to move

Press ANS/RLS button to select ALL

[ALL] PBX LINE

3. Dial 1 for PBX or 0 for Trunk Line

[704] PBX LINE

PBX LINE

Use Volume button to scroll through options

Press Right Soft button to return to step 2

4. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

ALL TRUNK LINES