Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

403 Trunk Toll Class

Assigns toll class level assignments on a per-trunk or all-trunk basis in a day or night

condition. The options for toll level will follow either the station class or the class of

service defined in MMCs 702, Toll Deny Table, and 703, Toll Allowance Table.

The toll classes that are available are listed below with their entry numbers.

No Class Description

0 F-STN Follow station toll restriction

1 CLS-A Follow toll class A(Unrestricted)

2 CLS-B Follow toll class B

3 CLS-C Follow toll class C

4 CLS-D Follow toll class D

5 CLS-E Follow toll class E

6 CLS-F Follow toll class F

7 CLS-G Follow toll class G

8 CLS-H Follow toll class H(All restricted)

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ANS/RLS Used to select ALL

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 403

Display shows

[701] TOLL CLASS

1:F-STN 2:F-STN

2. Dial trunk number(e.g., 704)

[704] TOLL CLASS

1:F-STN 2:F-STN

Use Volume button to scroll through trunk numbers

and press Right Soft button to move the cursor

Press ANS/RLS button to select ALL

[ALL] TOLL CLASS

1:F-STN 2:F_STN