Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

405 Trunk C.O. Telephone Number

Allows an 11-digit number to be entered to identify an individual trunk.

Numbers are written using the keypad. Each press of a key selects a digit. Pressing

the desired key moves the cursor to the next position. For example, if the directory

number is 426-4100, press the number 4 once to get the number 4. Now press the

number 2 once for number 2. Continue selecting characters from the table below to

complete your number.

When the number you want appears on the same dial keypad key as the previous

number, press the Volume Up button to move the cursor to the right or the Volume

Down button to move the cursor left. A space can be entered by using these keys.

Count 1 2 3 4 5

DIAL 0 0 < > . )

DIAL 1 1 Space ? , !

DIAL 2 2 A B C @

DIAL 3 3 D E F #

DIAL 4 4 G H I $

DIAL 5 5 J K L %

DIAL 6 6 M N O ^

DIAL 7 7 P Q R S

DIAL 8 8 T U V *

DIAL 9 9 W X Y Z

DIAL * * : = [ ]

The # button can be used for special characters : #, space, &, !, :, ?, ., %, $, -,

, /,

=, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.

PROGRAM BUTTONS

VOLUME Used to scroll through options/move cursor left or right

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

A Acts as toggle between upper case and lower case