Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-121
409 Trunk Status Read
Allows the status of trunks to be read in a format that will enable the servicing
personnel to quickly identify the ownership and position of a trunk. This is a read-
only MMC.
Trunk Status Type No Description
00 Port Number(Cabinet/Slot/Port)
01 Type : LOOP, GND, E & M, DID, BRI, PRI, VOIP…
02 1A2 Emulation On/Off
03 Trunk Forward On/Off
04 Line Type : CO/PBX
05 Dial Type : DTMF/Dial Pulse
06-11 Ring Plan Toll Restriction(1-6)
12-17 Ring Plan Ring Destination(1-6)
18 MOH Source
19 DISA Status
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 409
Display shows
[701] TRK STATUS
PORT:C1-S5-P01
2. Enter trunk number via dial keypad(e.g., 704)
OR
[704] TRK STATUS
PORT:C1-S5-P04
Press Volume button to make selection and press
Right Soft button to advance cursor
3. Enter in desired option 00-12(e.g., 02)
OR
[704] TRK STATUS
TYPE:LOOP TRUNK
Press Volume button to make selection