Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-123
410 Assign DISA Trunk
Allows the system the ability to have Direct Inward System Access(DISA).
Because there is a possibility that unauthorized calls will be made via this feature,
several safeguards have been added. The end user must be informed of these to
prevent unnecessary service calls. DISA can lockout when a predetermined number
of invalid consecutive calls are attempted.
Callers will then receive error tone until the programmable timer has expired.
The * key may be used to initiate new dial tone while in a station to station call.
The # button may be used to terminate the DISA call and disconnect the central
office line. DISA lines must be assigned to the Ring Plan(s).
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL(trunks)
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 410
Display shows
[701] 123456
DISA LINE:000000
2. Dial trunk number(e.g., 704)
OR
[704] 123456
DISA LINE:000000
Press Volume button to select trunk and press
Right Soft button
OR
Press ANS/RLS button to select all trunks
[ALL] 123456
DISA LINE:000000
OR
3. Press VOL key Volume button to select a
Ring Plan.
[704] 123456
DISA LINE:001000
OR
Using the dial keypad press 1 to apply and 0 not
to apply to a particular Ring Plan and press Right
Soft button to return to step 2