Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

418 BRI Card Restart

Enables any changes you make in MMC 419 (BRI Option) or MMC 423 (S/T Mode)

and applies them, as appropriate, to BRI card that you restart.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 418

Display shows first BRI or PRI circuit

[701] RESTART

CARD RESTART?NO

2. Dial first trunk on a BRI or PRI card(e.g., 733)

[701] RESTART

CARD RESTART?NO

Press Volume button to select the first trunk

and press Right Soft button to move the cursor

3. Dial 1 for YES or Dial 0 for NO

Pressing 1 will advance to step 4

[701] RESTART

CARD RESTART?YES

4. Dial 1 for YES or Dial 0 for NO

Pressing 1 or 0 will return to step 2

[701] RESTART

ARE YOU SURE?YES

5. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

NONE