Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-131
No Option Description
NB PLAN Used to select the type of the Calling Party Number Plan to send to the
network.
UNKNOWN Unknown numbering plan
ISDN ISDN numbering plan(CCITT E.163-164)
DATA Data numbering plan(CCITT X.121)
TELEX Telex numbering plan(CCITT F.69)
NATIONAL National standard numbering plan
PRIVATE Private numbering plan
5
EXTEN Local numbering plan
OPTIONS FOR BRI PORTS PROGRAMMED AS STATIONS
No Option Description
0 ANY CHANNEL When this option is set to YES, the system will place calls on any free
channel of that BRI if the channel chosen by the user is busy(e.g., Preferred
channel selection). If set to NO, the user will receive a busy signal if they
attempt to access a busy channel even if the other channel on that BRI is
free(e.g., Exclusive channel selection).
1 POWER FEED This field determines if power to a BRI access will be supplied.(YES or NO)
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 419
Display shows first BRI channel
[701] BRI-TRK
CHANNEL ANY:YES
2. Dial BRI trunk number(e.g., 702)
OR
[702] BRI-TRK
CHANNEL ANY:YES
Press Volume button to select BRI trunk and
Press Right Soft button.