Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-134 © SAMSUNG Electronics Co., Ltd.
421 MSN Digit
Provides a method of assigning an incoming MSN call to a specific station. If any
entry in MSN DIGIT TABLE matches an incoming call’s called party number,
either the specific station is alerted, if it is programmed to accept the call, or the call
is cleared if it is programmed to reject the call.
If the incoming called party number does not have a matching entry in the MSN
table, MMC 406 ringing destination is alerted or the call is released by option.
You can give each MSN number to a specific station and you can select call waiting
option: when a destination is busy, the incoming call must be cleared or camped-on to
the station(which is alerted to the call).
There is a total of eight entries on a trunk basis and each entry consists of the
following fields :
Entry Field Description
DIGIT Digits to be received. There is a maximum of 16 digits
RING 1-6 These numbers correspond to the six ring plan destinations for this MSN.
The destinations can be either stations or station groups.
CALL WAIT Toggles YES or NO : if YES then the call will be camped-on at busy destination while
NO gives busy indication.
OPTION if Accept then the selected destination party will be alerted. If Reject then the call will
be cleared.
For each BRI access, two adjacent ports are assigned. You need only change the
value for one of the two ports; the value for the other port will be changed
automatically.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL