Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 1. Before Programming
© SAMSUNG Electronics Co., Ltd. Page 1-3
MSG button. The MSG button flashes to indicate message waiting.
When MMC programming, other functions programmed on the programmable buttons
are as follows :
!
ANS/RLS Button : Answer and release calls
!
Hold Button : Hold Calls
!
Memory Button : Speed dialing button
!
Redial Button : Last number redial
!
Transfer Button : Transfer current call(or enter MMC programming mode)
!
Speaker Button : Switch on speakerphone
2.2 DS-4000 Series phones
The following figure shows the shape of DS-4028E phone among DS-4000 series
phones.
Figure 1.2 DS-4028E Phone
Among 3 Soft buttons, the first one is called the ‘Left Soft button’, which is used to
save the modified data or to move the cursor inside the LCD display in the left
direction.
Among 3 Soft buttons, the third one is called the ‘Right Soft button’, which is used to
save the modified data or to move the cursor in the right direction.
Among 8 programmable buttons, the first 6 programmable buttons are assigned as
‘A’-‘F’ to carry out specific functions or usage while programming. Generally, these
buttons perform specific functions that you set for each corresponding button.
When MMC programming, other functions programmed on the programmable buttons
are as follows :
LCD Dis
p
la
y
Dial Buttons
Left Soft Button Right Soft Button
Hold Button
Volume Buttons
Speaker Button
A Button
B Button
Transfer Button
ANS/RLS Button