Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-143
428 Assign Trunk/Trunk Use
This MMC is used to allow or restrict trunks from making outgoing calls to each
other within the same system.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 428
Display shows
(301) USE (301)
DIAL:YES
2. Dial the trunk use group number(e.g., 305)
OR
(305) USE (301)
DIAL:YES
Press Volume button to selection and press Right
Soft button
OR
Press ANS/RLS button to select all trunk use
(ALL) USE (301)
DIAL:YES
groups
3. Dial the trunk use group number(e.g., 304)
OR
(305) USE (304)
DIAL:YES
Press Volume button to selection and press Right
Soft button
4. Dial 1 for YES or 0 for NO
OR
(305) USE (304)
DIAL:NO
Press Volume button to select YES/NO and
press Right Soft button to move cursor
5. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC